OSA SERIES CAMERAS

OSA MODELS
OSA4
OSA7
OSA8

Overview

The IDT Os Series Version 3 Airborne Camera comes with 16 GB of integrated DDR and can be configured with up to 1 TB of non-volatile solid-state memory. With a maximum resolution of 1024 x 1024 pixels, the OSA4 can record up to 1,200 fps. Latest CMOS sensor technology produces extremely low-noise images. Support for several sensor platforms deliver various resolutions and frame rates. Power Supply, OS Moutining Plate and Break-out cable for easy out-of-the-box operation are included.

Features:

  • IP68
  • Optional Solid-State non-volatile memory
  • High dynamic range
  • Max FPS: 1,200 fps
  • HDSDI Optional

Benefits:

  • Airborne ready
  • High capacity image storage
  • Low noise images
  • High Frame Rates
  • Live High Definition Playback
At A Glance
Click, drag and release handle bar to compare key attributes.
OSA4-S1-PC
Resolution
Maximum Frame Rate
Max Record Time (8 GB)
Streaming Frame Rate
More
Configurations
Accessories
Documentation

Specification Sheets


OSA4-S1
Standard Accessories
24V Power Supply
24V Power Supply for 19-pin LEMO Breakout Cable 1100-0009.
Part Number: 1100-0103
Breakout Cable
Breakout Cable, 19-pin LEMO to 4x BNC, DIN power and RJ45, 5ft. Compatible with 19-pin cameras and USB-C to 19-pin Adapter 1421-0131.
Part Number: 1100-0009
OS Mounting Plate
OS Mounting Plate
Part Number: 1406-0207
19-pin LEMO Cables
19-Pin LEMO Cable, Straight
LEMO cable, 19-pin to 19-pin, straight. Compatible with 19-pin cameras and hubs. Sizes include: 1084-0200-1 (5m), 1084-0200-3 (10m), 1084-0200-5 (20m).
Part Number: 1084-0200
19-Pin LEMO Cable, Right Angle
LEMO cable, 19-pin to 19-pin, right angle LEMO connector and straight LEMO connector. OS-V3 and O Series: right angle connector faces up. NXA series: right angle connector faces down. Compatible with 19-pin cameras and hubs. Sizes include: 1084-0400-1 (5m), 1084-0400-3 (10m), 1084-0400-5 (20m).
Part Number: 1084-0400
19-Pin LEMO Cable, Right Angle
LEMO cable, 19-pin to 19-pin, right angle LEMO connector and straight LEMO connector. OS-V3 and O Series: right angle connector faces down. For NXA series: right angle connector faces up. Compatible with 19-pin cameras and hubs. Sizes include: 1301-0400-5 (20m).
Part Number: 1301-0400
Signal Hub and Accessories
19-pin Signal Hub
19-pin Signal Hub, provides power, communication, IRIG, and synchronization. RJ45 Ethernet, 19-pin LEMO, 4-pin Din, 5x BNC connectors for Trigger, Sync In, Sync Out, Ready signal and IRIG. Compatible with all 19-pin cameras and cables.
Part Number: 1098-0107
24V Power Supply
24V Power Supply for 19-pin LEMO Breakout Cable 1100-0009.
Part Number: 1100-0103
SMA to BNC Cable
SMA Male to BNC Male cable, 5.0 ft. Can be used with trigger pickle switch or between SMA connectors on hubs and devices with BNC connectors. Compatible with all camera series and hubs.
Part Number: 1116-0400
IEEE1588 PTP HUB and Accessories
IEEE1588 PTP HUB
IEEE1588 PTP HUB, provides precision timing over Giga Ethernet. Controls up to two cameras and requires IEEE1588 PTP Hub Power Supply 1425-0150. Compatible with 19-pin cameras (NX-Air with exception to the IEEE1588 protocol).
Part Number: 1425-0100
IEEE1588 PTP Hub Power Supply
24V Power Supply with 4-Pin LEMO connector for IEEE1588 PTP HUB 1425-0100.
Part Number: 1425-0150
SMA to BNC Cable
SMA Male to BNC Male cable, 5.0 ft. Can be used with trigger pickle switch or between SMA connectors on hubs and devices with BNC connectors. Compatible with all camera series and hubs.
Part Number: 1116-0400
IEEE1588 PTP Hub Battery & Battery Plate
Includes IEEE1588 PTP HUB Battery 1425-0151 and IEEE1588 PTP Hub Battery Plate 1425-0152. Requires installation at IDT manufacturing facility.
Part Number: 1425-7001
IEEE 1588 PTP Hub Battery
IEEE1588 PTP HUB Battery. Powers the IEEE1588 PTP HUB 1425-0100 and two 19-pin cameras for up to 1.5 hours on a full charge. Requires installation of the IEEE1588 PTP Hub Battery Plate 1425-7001 at IDT manifacturing facility.
Part Number: 1425-0151
IEEE 1588 PTP Hub Battery Plate
IEEE1588 PTP HUB Battery Plate. Allows you to attach the IEEE1588 PTP HUB Battery to the IEEE1588 PTP HUB. Requires installation at IDT manifacturing facility.
Part Number: 1425-0152
miniHUB and Accessories
3-Port miniHUB
miniHUB, wired and 802.11 ac WiFi wireless control. Provides power, communication, synchronization and control for up to three 19-pin cameras. Requires 24V Power Supply 1424-0100.
Part Number: 1135-0100
24V Power Supply
24V Power Supply with 8-pin LEMO connector, powers miniHUB 1135-0100, TC19 HUB 1447-0100 and TC30 HUB 1447-0110.
Part Number: 1424-0100
SMA to BNC Cable
SMA Male to BNC Male cable, 5.0 ft. Can be used with trigger pickle switch or between SMA connectors on hubs and devices with BNC connectors. Compatible with all camera series and hubs.
Part Number: 1116-0400
TC19 HUB and Accessories
TC19 HUB
TC19 HUB - 4 Port 19-pin Timing Control Hub. Provides power, communication, synchronization and control for up to four 19-pin cameras (without LEDs). Dual battery connector ports compatible with Stackable 45Wh Battery Modules 1447-0120 allow for untethered operation. Inputs include: GPS, IRIG, Sync and trigger. GPS and IRIG timing sent to camera through ethernet (PTP). Recommended accessory sold separately: Intel® Core™ m5-6Y57 vPro™ processor.
Part Number: 1447-0100
24V Power Supply
24V Power Supply with 8-pin LEMO connector, powers miniHUB 1135-0100, TC19 HUB 1447-0100 and TC30 HUB 1447-0110.
Part Number: 1424-0100
Ethernet Cable
Industrial Mini I/O connector to RJ45 connector, 1m Ethernet cable for TC19 HUB 1447-0100, TC30 HUB 1447-0110, Single Camera Dock 1450-0100 or Quad Camera Dock 1467-0100.
Part Number: 1447-0400
SMA to BNC Cable
SMA Male to BNC Male cable, 5.0 ft. Can be used with trigger pickle switch or between SMA connectors on hubs and devices with BNC connectors. Compatible with all camera series and hubs.
Part Number: 1116-0400
Stackable 45w Battery Module
Stackable 45Wh Battery Module for TC HUB?s. Can use up to two Stackable Battery Modules on either a TC19 HUB or TC30 HUB. Includes two clamp locks and screws for attachment. *Battery duration based on number of cameras and functions being used simultaneously.
Part Number: 1447-0120
Mini I/O to Mini I/O Cable
Mini I/O to Mini I/O Cable for TC19 HUB 1447-0100, TC30 HUB 1447-0110, Single Camera Dock 1450-0100 or Quad Camera Dock 1467-0100. Provides the ability to daisy-chain multiple TC HUB's and/or Single and Quad Camera Dock together.
Part Number: 1421-0403
6 Port Hub and Accessories
19-pin 6-Port Hub
6 Port Hub, provides power, communication, synchronization and control for up to six 19-pin cameras (without LEDs). Integrated battery backup, wired and wireless control. Requires 24V Power Supply 1089-0900 and 8-pin to 8-pin LEMO cable 1091-0901 for operation.
Part Number: 1091-1100
6-Port Hub Power Supply
24V Power Supply for NX-HUB 1091-0900 and NXA-HUB 1091-1100. Requires 8-pin to 8-pin LEMO cable 1091-0901.
Part Number: 1089-0900
Power Supply Accessory Cable
8 pin to 8 pin LEMO cable, 2 ft., connects 6 Port Hub 1091-1100 to 24V Power Supply 1089-0900.
Part Number: 1091-0901
SMA to BNC Cable
SMA Male to BNC Male cable, 5.0 ft. Can be used with trigger pickle switch or between SMA connectors on hubs and devices with BNC connectors. Compatible with all camera series and hubs.
Part Number: 1116-0400
High G Rack Hub and Accessories
High G Rack Hub
High G Rack Hub. Power, communicate, synchronize and control up to 16 different IDT Cameras or Veritas LEDs in multiple configurations. Compatible with IDT 16-pin/19-pin cameras, Veritas CrashLED 160, LED 12, LED 8 or FlexLED. High G Rack Hub includes base with power ports, internal GPS/1PPS timing and Status connector for monitoring. Power Supply 1140-0160, Power cables 1140-0401 and Ethernet cable 1140-0400 required for operation. (Modules and communication cables sold separately).
Part Number: 1140-0100
High G Rack HUB Power Cable
High G Rack Hub power cable. 4-pin Amphenol Bayonet locking connector. For use with High G Rack Hub (1140-0100) only. Requires two per High G Rack Hub.
Part Number: 1140-0401
High G Rack HUB Ethernet Cable
Ethernet cable, RJ45 Ethernet connector to 19-pin LEMO connector for High G Rack Hub (1140-0100).
Part Number: 1140-0400
High G Rack HUB Power Supply
High G Rack Hub Power Supply, provides power to High G Rack Hub 1140-0100 and connected modules.
Part Number: 1140-0160
SMA to BNC Cable
SMA Male to BNC Male cable, 5.0 ft. Can be used with trigger pickle switch or between SMA connectors on hubs and devices with BNC connectors. Compatible with all camera series and hubs.
Part Number: 1116-0400
19-pin Camera Module
19-pin Camera Module, supports up to 4x 19-pin cameras (w/o LEDs). Requires High G Rack Hub (1140-0100).
Part Number: 1146-0110
16-pin Camera Module
16-pin Camera Module, supports up to 4x 16-pin cameras (w/o LEDs). Requires High G Rack Hub (1140-0100).
Part Number: 1147-0110
LED Module
LED Module, supports up to 4x CrashLED 160, LED 12, LED 8, or FlexLED. Requires High G Rack Hub (1140-0100).
Part Number: 1148-0100
Additional Accessories
Os Battery Module
3Wh Battery Back-up for OS, OSA, CC series cameras, Single Camera Dock 1450-0100 and Quad Camera Dock 1467-0100. *Battery duration based on number of cameras and functions being used simultaneously.
Part Number: 1406-0150
OS High G Mounting Plate
OS High G Mounting Plate. Rated to 200G Impact and 40G Vibration @ 30s on top, side, or bottom of OS, OSA or CC series cameras.
Part Number: 1406-0101
SMA to BNC Cable
SMA Male to BNC Male cable, 5.0 ft. Can be used with trigger pickle switch or between SMA connectors on hubs and devices with BNC connectors. Compatible with all camera series and hubs.
Part Number: 1116-0400
F-Mount
F-mount adapter, provides F-Mount Lens Compatibility for cameras with C/F-Mount.
Part Number: -FM (1400-3000)
PL-Mount
PL-mount adapter, provides PL-mount Lens Compatability for C-mount cameras. Note: PL-mount not for High G applications.
Part Number: -PL (1302-0100)
C-Mount to Micro Four Thirds Adapter
C-mount to Micro Four Thirds adapter. Maximum lens rear housing size must be <1.45? or 37mm.
Part Number: 1461-0200
Metabones Speed Booster
Metabones Speed Booster XL 0.64x Adapter for Nikon F-Mount Lens to Select Micro Four Thirds mount cameras.
Part Number: 1461-0100
T Speed Booster
T Speed Booster XL 0.64x Adapter for Full-Frame Canon EF-Mount Lens to Select Micro Four Thirds Mount cameras.
Part Number: 1461-0101
C-Mount Lens Tube
Lens tube, supports C-Mount Lenses for sealed camera configurations or to protect lens from debris.
Part Number: 1420-0100
OS Fan Pack
OS Fan Pack
Part Number: 1406-0174
Previous Next

Overview

The IDT Os Series Version 3 Airborne Camera comes with 16 GB of integrated DDR and can be configured with up to 1 TB of non-volatile solid-state memory. With a maximum resolution of 1920 x 1280 pixels, the OSA7 can record up to 1,350 fps. Latest CMOS sensor technology produces extremely low-noise images. Support for several sensor platforms deliver various resolutions and frame rates. Power Supply, OS Moutining Plate and Break-out cable for easy out-of-the-box operation are included.

Features:

  • IP68
  • Optional Solid-State non-volatile memory
  • High dynamic range
  • Max FPS: 1,350 fps
  • HDSDI Optional

Benefits:

  • Airborne ready
  • High capacity image storage
  • Low noise images
  • High Frame Rates
  • Live High Definition Playback
At A Glance
Click, drag and release handle bar to compare key attributes.
OSA7-S1-PC
Resolution
Maximum Frame Rate
Max Record Time (8 GB)
Streaming Frame Rate
More
Configurations
Accessories
Documentation

Specification Sheets


OSA7-S1
Standard Accessories
24V Power Supply
24V Power Supply for 19-pin LEMO Breakout Cable 1100-0009.
Part Number: 1100-0103
Breakout Cable
Breakout Cable, 19-pin LEMO to 4x BNC, DIN power and RJ45, 5ft. Compatible with 19-pin cameras and USB-C to 19-pin Adapter 1421-0131.
Part Number: 1100-0009
OS Mounting Plate
OS Mounting Plate
Part Number: 1406-0207
19-pin LEMO Cables
19-Pin LEMO Cable, Straight
LEMO cable, 19-pin to 19-pin, straight. Compatible with 19-pin cameras and hubs. Sizes include: 1084-0200-1 (5m), 1084-0200-3 (10m), 1084-0200-5 (20m).
Part Number: 1084-0200
19-Pin LEMO Cable, Right Angle
LEMO cable, 19-pin to 19-pin, right angle LEMO connector and straight LEMO connector. OS-V3 and O Series: right angle connector faces up. NXA series: right angle connector faces down. Compatible with 19-pin cameras and hubs. Sizes include: 1084-0400-1 (5m), 1084-0400-3 (10m), 1084-0400-5 (20m).
Part Number: 1084-0400
19-Pin LEMO Cable, Right Angle
LEMO cable, 19-pin to 19-pin, right angle LEMO connector and straight LEMO connector. OS-V3 and O Series: right angle connector faces down. For NXA series: right angle connector faces up. Compatible with 19-pin cameras and hubs. Sizes include: 1301-0400-5 (20m).
Part Number: 1301-0400
Signal Hub and Accessories
19-pin Signal Hub
19-pin Signal Hub, provides power, communication, IRIG, and synchronization. RJ45 Ethernet, 19-pin LEMO, 4-pin Din, 5x BNC connectors for Trigger, Sync In, Sync Out, Ready signal and IRIG. Compatible with all 19-pin cameras and cables.
Part Number: 1098-0107
24V Power Supply
24V Power Supply for 19-pin LEMO Breakout Cable 1100-0009.
Part Number: 1100-0103
SMA to BNC Cable
SMA Male to BNC Male cable, 5.0 ft. Can be used with trigger pickle switch or between SMA connectors on hubs and devices with BNC connectors. Compatible with all camera series and hubs.
Part Number: 1116-0400
IEEE1588 PTP HUB and Accessories
IEEE1588 PTP HUB
IEEE1588 PTP HUB, provides precision timing over Giga Ethernet. Controls up to two cameras and requires IEEE1588 PTP Hub Power Supply 1425-0150. Compatible with 19-pin cameras (NX-Air with exception to the IEEE1588 protocol).
Part Number: 1425-0100
IEEE1588 PTP Hub Power Supply
24V Power Supply with 4-Pin LEMO connector for IEEE1588 PTP HUB 1425-0100.
Part Number: 1425-0150
SMA to BNC Cable
SMA Male to BNC Male cable, 5.0 ft. Can be used with trigger pickle switch or between SMA connectors on hubs and devices with BNC connectors. Compatible with all camera series and hubs.
Part Number: 1116-0400
IEEE1588 PTP Hub Battery & Battery Plate
Includes IEEE1588 PTP HUB Battery 1425-0151 and IEEE1588 PTP Hub Battery Plate 1425-0152. Requires installation at IDT manufacturing facility.
Part Number: 1425-7001
IEEE 1588 PTP Hub Battery
IEEE1588 PTP HUB Battery. Powers the IEEE1588 PTP HUB 1425-0100 and two 19-pin cameras for up to 1.5 hours on a full charge. Requires installation of the IEEE1588 PTP Hub Battery Plate 1425-7001 at IDT manifacturing facility.
Part Number: 1425-0151
IEEE 1588 PTP Hub Battery Plate
IEEE1588 PTP HUB Battery Plate. Allows you to attach the IEEE1588 PTP HUB Battery to the IEEE1588 PTP HUB. Requires installation at IDT manifacturing facility.
Part Number: 1425-0152
miniHUB and Accessories
3-Port miniHUB
miniHUB, wired and 802.11 ac WiFi wireless control. Provides power, communication, synchronization and control for up to three 19-pin cameras. Requires 24V Power Supply 1424-0100.
Part Number: 1135-0100
24V Power Supply
24V Power Supply with 8-pin LEMO connector, powers miniHUB 1135-0100, TC19 HUB 1447-0100 and TC30 HUB 1447-0110.
Part Number: 1424-0100
SMA to BNC Cable
SMA Male to BNC Male cable, 5.0 ft. Can be used with trigger pickle switch or between SMA connectors on hubs and devices with BNC connectors. Compatible with all camera series and hubs.
Part Number: 1116-0400
TC19 HUB and Accessories
TC19 HUB
TC19 HUB - 4 Port 19-pin Timing Control Hub. Provides power, communication, synchronization and control for up to four 19-pin cameras (without LEDs). Dual battery connector ports compatible with Stackable 45Wh Battery Modules 1447-0120 allow for untethered operation. Inputs include: GPS, IRIG, Sync and trigger. GPS and IRIG timing sent to camera through ethernet (PTP). Recommended accessory sold separately: Intel® Core™ m5-6Y57 vPro™ processor.
Part Number: 1447-0100
24V Power Supply
24V Power Supply with 8-pin LEMO connector, powers miniHUB 1135-0100, TC19 HUB 1447-0100 and TC30 HUB 1447-0110.
Part Number: 1424-0100
Ethernet Cable
Industrial Mini I/O connector to RJ45 connector, 1m Ethernet cable for TC19 HUB 1447-0100, TC30 HUB 1447-0110, Single Camera Dock 1450-0100 or Quad Camera Dock 1467-0100.
Part Number: 1447-0400
SMA to BNC Cable
SMA Male to BNC Male cable, 5.0 ft. Can be used with trigger pickle switch or between SMA connectors on hubs and devices with BNC connectors. Compatible with all camera series and hubs.
Part Number: 1116-0400
Stackable 45w Battery Module
Stackable 45Wh Battery Module for TC HUB?s. Can use up to two Stackable Battery Modules on either a TC19 HUB or TC30 HUB. Includes two clamp locks and screws for attachment. *Battery duration based on number of cameras and functions being used simultaneously.
Part Number: 1447-0120
Mini I/O to Mini I/O Cable
Mini I/O to Mini I/O Cable for TC19 HUB 1447-0100, TC30 HUB 1447-0110, Single Camera Dock 1450-0100 or Quad Camera Dock 1467-0100. Provides the ability to daisy-chain multiple TC HUB's and/or Single and Quad Camera Dock together.
Part Number: 1421-0403
6 Port Hub and Accessories
19-pin 6-Port Hub
6 Port Hub, provides power, communication, synchronization and control for up to six 19-pin cameras (without LEDs). Integrated battery backup, wired and wireless control. Requires 24V Power Supply 1089-0900 and 8-pin to 8-pin LEMO cable 1091-0901 for operation.
Part Number: 1091-1100
6-Port Hub Power Supply
24V Power Supply for NX-HUB 1091-0900 and NXA-HUB 1091-1100. Requires 8-pin to 8-pin LEMO cable 1091-0901.
Part Number: 1089-0900
Power Supply Accessory Cable
8 pin to 8 pin LEMO cable, 2 ft., connects 6 Port Hub 1091-1100 to 24V Power Supply 1089-0900.
Part Number: 1091-0901
SMA to BNC Cable
SMA Male to BNC Male cable, 5.0 ft. Can be used with trigger pickle switch or between SMA connectors on hubs and devices with BNC connectors. Compatible with all camera series and hubs.
Part Number: 1116-0400
High G Rack Hub and Accessories
High G Rack Hub
High G Rack Hub. Power, communicate, synchronize and control up to 16 different IDT Cameras or Veritas LEDs in multiple configurations. Compatible with IDT 16-pin/19-pin cameras, Veritas CrashLED 160, LED 12, LED 8 or FlexLED. High G Rack Hub includes base with power ports, internal GPS/1PPS timing and Status connector for monitoring. Power Supply 1140-0160, Power cables 1140-0401 and Ethernet cable 1140-0400 required for operation. (Modules and communication cables sold separately).
Part Number: 1140-0100
High G Rack HUB Power Cable
High G Rack Hub power cable. 4-pin Amphenol Bayonet locking connector. For use with High G Rack Hub (1140-0100) only. Requires two per High G Rack Hub.
Part Number: 1140-0401
High G Rack HUB Ethernet Cable
Ethernet cable, RJ45 Ethernet connector to 19-pin LEMO connector for High G Rack Hub (1140-0100).
Part Number: 1140-0400
High G Rack HUB Power Supply
High G Rack Hub Power Supply, provides power to High G Rack Hub 1140-0100 and connected modules.
Part Number: 1140-0160
SMA to BNC Cable
SMA Male to BNC Male cable, 5.0 ft. Can be used with trigger pickle switch or between SMA connectors on hubs and devices with BNC connectors. Compatible with all camera series and hubs.
Part Number: 1116-0400
19-pin Camera Module
19-pin Camera Module, supports up to 4x 19-pin cameras (w/o LEDs). Requires High G Rack Hub (1140-0100).
Part Number: 1146-0110
16-pin Camera Module
16-pin Camera Module, supports up to 4x 16-pin cameras (w/o LEDs). Requires High G Rack Hub (1140-0100).
Part Number: 1147-0110
LED Module
LED Module, supports up to 4x CrashLED 160, LED 12, LED 8, or FlexLED. Requires High G Rack Hub (1140-0100).
Part Number: 1148-0100
Additional Accessories
Os Battery Module
3Wh Battery Back-up for OS, OSA, CC series cameras, Single Camera Dock 1450-0100 and Quad Camera Dock 1467-0100. *Battery duration based on number of cameras and functions being used simultaneously.
Part Number: 1406-0150
OS High G Mounting Plate
OS High G Mounting Plate. Rated to 200G Impact and 40G Vibration @ 30s on top, side, or bottom of OS, OSA or CC series cameras.
Part Number: 1406-0101
SMA to BNC Cable
SMA Male to BNC Male cable, 5.0 ft. Can be used with trigger pickle switch or between SMA connectors on hubs and devices with BNC connectors. Compatible with all camera series and hubs.
Part Number: 1116-0400
F-Mount
F-mount adapter, provides F-Mount Lens Compatibility for cameras with C/F-Mount.
Part Number: -FM (1400-3000)
PL-Mount
PL-mount adapter, provides PL-mount Lens Compatability for C-mount cameras. Note: PL-mount not for High G applications.
Part Number: -PL (1302-0100)
C-Mount to Micro Four Thirds Adapter
C-mount to Micro Four Thirds adapter. Maximum lens rear housing size must be <1.45? or 37mm.
Part Number: 1461-0200
Metabones Speed Booster
Metabones Speed Booster XL 0.64x Adapter for Nikon F-Mount Lens to Select Micro Four Thirds mount cameras.
Part Number: 1461-0100
T Speed Booster
T Speed Booster XL 0.64x Adapter for Full-Frame Canon EF-Mount Lens to Select Micro Four Thirds Mount cameras.
Part Number: 1461-0101
C-Mount Lens Tube
Lens tube, supports C-Mount Lenses for sealed camera configurations or to protect lens from debris.
Part Number: 1420-0100
OS Fan Pack
OS Fan Pack
Part Number: 1406-0174
Previous Next

Overview

The IDT Os Series Version 3 Airborne Camera comes with 16 GB of integrated DDR and can be configured with up to 1 TB of non-volatile solid-state memory. With a maximum resolution of 1600 x 1200 pixels, the OSA8 can record up to 1,500 fps. Latest CMOS sensor technology produces extremely low-noise images. Support for several sensor platforms deliver various resolutions and frame rates. Power Supply, OS Moutining Plate and Break-out cable for easy out-of-the-box operation are included.

Features:

  • IP68
  • Optional Solid-State non-volatile memory
  • High dynamic range
  • Max FPS: 1,500 fps
  • HDSDI Optional

Benefits:

  • Airborne ready
  • High capacity image storage
  • Low noise images
  • High Frame Rates
  • Live High Definition Playback
At A Glance
Click, drag and release handle bar to compare key attributes.
OSA8-S1-PC
Resolution
Maximum Frame Rate
Max Record Time (8 GB)
Streaming Frame Rate
More
Configurations
Accessories
Documentation

Specification Sheets


OSA8-S1
Standard Accessories
24V Power Supply
24V Power Supply for 19-pin LEMO Breakout Cable 1100-0009.
Part Number: 1100-0103
Breakout Cable
Breakout Cable, 19-pin LEMO to 4x BNC, DIN power and RJ45, 5ft. Compatible with 19-pin cameras and USB-C to 19-pin Adapter 1421-0131.
Part Number: 1100-0009
OS Mounting Plate
OS Mounting Plate
Part Number: 1406-0207
19-pin LEMO Cables
19-Pin LEMO Cable, Straight
LEMO cable, 19-pin to 19-pin, straight. Compatible with 19-pin cameras and hubs. Sizes include: 1084-0200-1 (5m), 1084-0200-3 (10m), 1084-0200-5 (20m).
Part Number: 1084-0200
19-Pin LEMO Cable, Right Angle
LEMO cable, 19-pin to 19-pin, right angle LEMO connector and straight LEMO connector. OS-V3 and O Series: right angle connector faces up. NXA series: right angle connector faces down. Compatible with 19-pin cameras and hubs. Sizes include: 1084-0400-1 (5m), 1084-0400-3 (10m), 1084-0400-5 (20m).
Part Number: 1084-0400
19-Pin LEMO Cable, Right Angle
LEMO cable, 19-pin to 19-pin, right angle LEMO connector and straight LEMO connector. OS-V3 and O Series: right angle connector faces down. For NXA series: right angle connector faces up. Compatible with 19-pin cameras and hubs. Sizes include: 1301-0400-5 (20m).
Part Number: 1301-0400
Signal Hub and Accessories
19-pin Signal Hub
19-pin Signal Hub, provides power, communication, IRIG, and synchronization. RJ45 Ethernet, 19-pin LEMO, 4-pin Din, 5x BNC connectors for Trigger, Sync In, Sync Out, Ready signal and IRIG. Compatible with all 19-pin cameras and cables.
Part Number: 1098-0107
24V Power Supply
24V Power Supply for 19-pin LEMO Breakout Cable 1100-0009.
Part Number: 1100-0103
SMA to BNC Cable
SMA Male to BNC Male cable, 5.0 ft. Can be used with trigger pickle switch or between SMA connectors on hubs and devices with BNC connectors. Compatible with all camera series and hubs.
Part Number: 1116-0400
IEEE1588 PTP HUB and Accessories
IEEE1588 PTP HUB
IEEE1588 PTP HUB, provides precision timing over Giga Ethernet. Controls up to two cameras and requires IEEE1588 PTP Hub Power Supply 1425-0150. Compatible with 19-pin cameras (NX-Air with exception to the IEEE1588 protocol).
Part Number: 1425-0100
IEEE1588 PTP Hub Power Supply
24V Power Supply with 4-Pin LEMO connector for IEEE1588 PTP HUB 1425-0100.
Part Number: 1425-0150
SMA to BNC Cable
SMA Male to BNC Male cable, 5.0 ft. Can be used with trigger pickle switch or between SMA connectors on hubs and devices with BNC connectors. Compatible with all camera series and hubs.
Part Number: 1116-0400
IEEE1588 PTP Hub Battery & Battery Plate
Includes IEEE1588 PTP HUB Battery 1425-0151 and IEEE1588 PTP Hub Battery Plate 1425-0152. Requires installation at IDT manufacturing facility.
Part Number: 1425-7001
IEEE 1588 PTP Hub Battery
IEEE1588 PTP HUB Battery. Powers the IEEE1588 PTP HUB 1425-0100 and two 19-pin cameras for up to 1.5 hours on a full charge. Requires installation of the IEEE1588 PTP Hub Battery Plate 1425-7001 at IDT manifacturing facility.
Part Number: 1425-0151
IEEE 1588 PTP Hub Battery Plate
IEEE1588 PTP HUB Battery Plate. Allows you to attach the IEEE1588 PTP HUB Battery to the IEEE1588 PTP HUB. Requires installation at IDT manifacturing facility.
Part Number: 1425-0152
miniHUB and Accessories
3-Port miniHUB
miniHUB, wired and 802.11 ac WiFi wireless control. Provides power, communication, synchronization and control for up to three 19-pin cameras. Requires 24V Power Supply 1424-0100.
Part Number: 1135-0100
24V Power Supply
24V Power Supply with 8-pin LEMO connector, powers miniHUB 1135-0100, TC19 HUB 1447-0100 and TC30 HUB 1447-0110.
Part Number: 1424-0100
SMA to BNC Cable
SMA Male to BNC Male cable, 5.0 ft. Can be used with trigger pickle switch or between SMA connectors on hubs and devices with BNC connectors. Compatible with all camera series and hubs.
Part Number: 1116-0400
TC19 HUB and Accessories
TC19 HUB
TC19 HUB - 4 Port 19-pin Timing Control Hub. Provides power, communication, synchronization and control for up to four 19-pin cameras (without LEDs). Dual battery connector ports compatible with Stackable 45Wh Battery Modules 1447-0120 allow for untethered operation. Inputs include: GPS, IRIG, Sync and trigger. GPS and IRIG timing sent to camera through ethernet (PTP). Recommended accessory sold separately: Intel® Core™ m5-6Y57 vPro™ processor.
Part Number: 1447-0100
24V Power Supply
24V Power Supply with 8-pin LEMO connector, powers miniHUB 1135-0100, TC19 HUB 1447-0100 and TC30 HUB 1447-0110.
Part Number: 1424-0100
Ethernet Cable
Industrial Mini I/O connector to RJ45 connector, 1m Ethernet cable for TC19 HUB 1447-0100, TC30 HUB 1447-0110, Single Camera Dock 1450-0100 or Quad Camera Dock 1467-0100.
Part Number: 1447-0400
SMA to BNC Cable
SMA Male to BNC Male cable, 5.0 ft. Can be used with trigger pickle switch or between SMA connectors on hubs and devices with BNC connectors. Compatible with all camera series and hubs.
Part Number: 1116-0400
Stackable 45w Battery Module
Stackable 45Wh Battery Module for TC HUB?s. Can use up to two Stackable Battery Modules on either a TC19 HUB or TC30 HUB. Includes two clamp locks and screws for attachment. *Battery duration based on number of cameras and functions being used simultaneously.
Part Number: 1447-0120
Mini I/O to Mini I/O Cable
Mini I/O to Mini I/O Cable for TC19 HUB 1447-0100, TC30 HUB 1447-0110, Single Camera Dock 1450-0100 or Quad Camera Dock 1467-0100. Provides the ability to daisy-chain multiple TC HUB's and/or Single and Quad Camera Dock together.
Part Number: 1421-0403
6 Port Hub and Accessories
19-pin 6-Port Hub
6 Port Hub, provides power, communication, synchronization and control for up to six 19-pin cameras (without LEDs). Integrated battery backup, wired and wireless control. Requires 24V Power Supply 1089-0900 and 8-pin to 8-pin LEMO cable 1091-0901 for operation.
Part Number: 1091-1100
6-Port Hub Power Supply
24V Power Supply for NX-HUB 1091-0900 and NXA-HUB 1091-1100. Requires 8-pin to 8-pin LEMO cable 1091-0901.
Part Number: 1089-0900
Power Supply Accessory Cable
8 pin to 8 pin LEMO cable, 2 ft., connects 6 Port Hub 1091-1100 to 24V Power Supply 1089-0900.
Part Number: 1091-0901
SMA to BNC Cable
SMA Male to BNC Male cable, 5.0 ft. Can be used with trigger pickle switch or between SMA connectors on hubs and devices with BNC connectors. Compatible with all camera series and hubs.
Part Number: 1116-0400
High G Rack Hub and Accessories
High G Rack Hub
High G Rack Hub. Power, communicate, synchronize and control up to 16 different IDT Cameras or Veritas LEDs in multiple configurations. Compatible with IDT 16-pin/19-pin cameras, Veritas CrashLED 160, LED 12, LED 8 or FlexLED. High G Rack Hub includes base with power ports, internal GPS/1PPS timing and Status connector for monitoring. Power Supply 1140-0160, Power cables 1140-0401 and Ethernet cable 1140-0400 required for operation. (Modules and communication cables sold separately).
Part Number: 1140-0100
High G Rack HUB Power Cable
High G Rack Hub power cable. 4-pin Amphenol Bayonet locking connector. For use with High G Rack Hub (1140-0100) only. Requires two per High G Rack Hub.
Part Number: 1140-0401
High G Rack HUB Ethernet Cable
Ethernet cable, RJ45 Ethernet connector to 19-pin LEMO connector for High G Rack Hub (1140-0100).
Part Number: 1140-0400
High G Rack HUB Power Supply
High G Rack Hub Power Supply, provides power to High G Rack Hub 1140-0100 and connected modules.
Part Number: 1140-0160
SMA to BNC Cable
SMA Male to BNC Male cable, 5.0 ft. Can be used with trigger pickle switch or between SMA connectors on hubs and devices with BNC connectors. Compatible with all camera series and hubs.
Part Number: 1116-0400
19-pin Camera Module
19-pin Camera Module, supports up to 4x 19-pin cameras (w/o LEDs). Requires High G Rack Hub (1140-0100).
Part Number: 1146-0110
16-pin Camera Module
16-pin Camera Module, supports up to 4x 16-pin cameras (w/o LEDs). Requires High G Rack Hub (1140-0100).
Part Number: 1147-0110
LED Module
LED Module, supports up to 4x CrashLED 160, LED 12, LED 8, or FlexLED. Requires High G Rack Hub (1140-0100).
Part Number: 1148-0100
Additional Accessories
Os Battery Module
3Wh Battery Back-up for OS, OSA, CC series cameras, Single Camera Dock 1450-0100 and Quad Camera Dock 1467-0100. *Battery duration based on number of cameras and functions being used simultaneously.
Part Number: 1406-0150
OS High G Mounting Plate
OS High G Mounting Plate. Rated to 200G Impact and 40G Vibration @ 30s on top, side, or bottom of OS, OSA or CC series cameras.
Part Number: 1406-0101
SMA to BNC Cable
SMA Male to BNC Male cable, 5.0 ft. Can be used with trigger pickle switch or between SMA connectors on hubs and devices with BNC connectors. Compatible with all camera series and hubs.
Part Number: 1116-0400
F-Mount
F-mount adapter, provides F-Mount Lens Compatibility for cameras with C/F-Mount.
Part Number: -FM (1400-3000)
PL-Mount
PL-mount adapter, provides PL-mount Lens Compatability for C-mount cameras. Note: PL-mount not for High G applications.
Part Number: -PL (1302-0100)
C-Mount to Micro Four Thirds Adapter
C-mount to Micro Four Thirds adapter. Maximum lens rear housing size must be <1.45? or 37mm.
Part Number: 1461-0200
Metabones Speed Booster
Metabones Speed Booster XL 0.64x Adapter for Nikon F-Mount Lens to Select Micro Four Thirds mount cameras.
Part Number: 1461-0100
T Speed Booster
T Speed Booster XL 0.64x Adapter for Full-Frame Canon EF-Mount Lens to Select Micro Four Thirds Mount cameras.
Part Number: 1461-0101
C-Mount Lens Tube
Lens tube, supports C-Mount Lenses for sealed camera configurations or to protect lens from debris.
Part Number: 1420-0100
OS Fan Pack
OS Fan Pack
Part Number: 1406-0174
Previous Next
MORE IDT CAMERAS

NX SERIES

Compact Camera Design

NX-Air SERIES

Untethered Operation

OS SERIES

Operate in Demanding Environments

CC SERIES

High G and Vibration rated

OSA SERIES

Supports Airborne Applications

CCM SERIES

Ultra-compact

O SERIES

Integrated Lens Control

XS SERIES

Record to Disk with PCIE

Y SERIES

Supports Long Record Times
Previous Next