MODELS

NXA3

NXA4

NXA5

NXA8

Note: The NXA3 is a Legacy product and no longer in production. This page remains for informational purposes only.

Previous Next

Overview

The NX-Air Series is an upgraded package of the NX that includes an on-board battery that allows for over one hour of untethered operation. The NX-Air can also be configured with an optional WiFi™ module for wireless operation. In this configuration, the camera is fully autonomous and can be operated remotely using a laptop, tablet or Mac iOS device like an iPad®. Power Supply, High G Universal Mounting Plate and Break-out cable for easy out-of-the-box operation are included.

Features:

WiFi compatible
Battery powered
Up to 3,800 fps
GPS enabled

Benefits:

Remote control operation
Able to use camera untethered
High Frame Rates
Global position tracking

At A Glance

Click, drag and release handle bar to compare key attributes.

Configurations

Accessories

Documentation

Specification Sheets

NXA3-S3
NXA3-S4

Interface Control Document

nx-air_series_icd.pdf

Extended Configuration Options

NXA IRIG Option

IRIG for NX-Air cameras. Replaces GPS.

Part Number: NXA-IRIG

Standard Accessories

Breakout Cable Power Supply

Power Supply for 19-pin LEMO Breakout Cable 1100-0009. Power Supply is 24V, 5A with 120W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1.2M (3.9 ft.) cable with 4-pin DIN, standard lock type.

Part Number: 1100-0103

Auxiliary Power Supply

24V, 2.5A Auxiliary Power Supply for NX-Air. Connects directly to NX-Air to charge internal battery.

Part Number: 1102-0152

NX-Air High-G Mount

High-G universal mounting plate for NXA cameras.

Part Number: 1084-0190

Signal Hub and Accessories

19-pin Signal Hub

19-pin Signal Hub, provides power, communication, IRIG, and synchronization. RJ45 Ethernet, 19-pin LEMO, 4-pin Din, 5x BNC connectors for Trigger, Sync In, Sync Out, Ready signal and IRIG. Compatible with all 19-pin cameras and cables. Requires 24V Power Supply 1100-0103 (Sold Separately) for operation.

Part Number: 1098-0107

Breakout Cable Power Supply

Part Number: 1100-0103

SMA to BNC Trigger Cable

The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.

Part Number: 1116-0400

miniHUB and Accessories

3-Port miniHUB

miniHUB, wired and 802.11 ac WiFi wireless control. Provides power, communication, synchronization and control for up to three 19-pin cameras. Requires 24V Power Supply 1424-0100 (Sold Separately) for operation.

Part Number: 1135-0100

4-Port TC Hub Power Supply

Power supply for 4-Port TC16 Hub 1447-0160, 4-Port TC19 Hub (Legacy) 1447-0100 and 4-Port TC30 Hubs 1447-0110 (and GATE). Power Supply is 24V, 9.2A with 221W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1M (3.2 ft.) cable with 8-pin Size 02B LEMO connector.

Part Number: 1424-0100

SMA to BNC Trigger Cable

Part Number: 1116-0400

TC19 HUB and Accessories

4-Port TC Hub Power Supply

Part Number: 1424-0100

Ethernet Cable

The Mini I/O Ethernet Cable connects Quad Camera Dock 1467-0100, TC16 Hub 1447-0160, TC19 Hub (Legacy)1447-0100 or TC30 Hubs 1447-0110 (and GATE) to a computer or ethernet switch. Cable is 1.5m (5 ft.) with mini I/O and RJ45 connectors.

Part Number: 1447-0400

SMA to BNC Trigger Cable

Part Number: 1116-0400

Stackable 45w Battery Module

Stackable 45Wh Battery Module for TC HUBs. Can use up to two Stackable Battery Modules on either a TC19 HUB or TC30 HUB. Includes two clamp locks and screws for attachment. *Battery duration based on number of cameras and functions being used simultaneously.

Part Number: 1447-0125

Mini I/O to Mini I/O Cable

The Mini I/O Daisy Chain cable connects two TC16 Hubs 1447-0160, TC19 (Legacy) Hubs 1447-0100, TC30 Hubs 1447-0110 (and GATE) together or any single TC Hub together with a single Quad Camera Dock 1467-0100. Cable is .5m (1.6 ft.) with mini I/O connectors on both ends.

Part Number: 1421-0403

6 Port Hub and Accessories

19-pin 6-Port Hub

6 Port Hub, provides power, communication, synchronization and control for up to six 19-pin cameras (without LEDs). Integrated battery backup, wired and wireless control. Requires 24V Power Supply 1089-0900 and 8-pin to 8-pin LEMO cable 1091-0901 (Sold Separately) for operation.

Part Number: 1091-1100

6-Port Hub Power Supply

Power Supply for 6-Port Hub 1091-1100. Power Supply is 24V, 10A, 480W with 800W maximum and voltage range of 85-264 VAC, 120-380 VDC. Requires LEMO cable 1091-0901 (Sold Separately) to power hub.

Part Number: 1089-0900

Power Supply Accessory Cable

LEMO cable to connect 6-Port Hub 1091-1100 to 6-Port Hub Power Supply 1089-0900. Cable is .6M (2 ft.) with 8-Pin to 8-Pin LEMO 2M connector.

Part Number: 1091-0901

SMA to BNC Trigger Cable

Part Number: 1116-0400

High G Rack Hub and Accessories

High G Rack Hub

16-Port High-G Rack Hub provides power, control, communications and synchronization for a total of sixteen cameras or twelve cameras and four LEDs. Compatible with 16-pin CCM LEMO cameras and with 16-pin and 19-pin USB-C cameras when used with adapters. Compatible with Veritas CrashLED 120 luminaires. Requires Ethernet Cable 1140-0400, Power Supply 1140-0160 and one Power Cable 1140-0401 (Each Sold Separately) when hub is configured with two cameras.

Part Number: 1140-0100

High G Rack Hub Power Cable

Power cable to connect High G Rack Hub 1140-0100 to High Rack Hub Power Supply 1140-0160. Cable is 1.5M(5 ft.) with a 4-pin Amphenol Bayonet locking connector. Requires two power cables per High G Rack Hub for operation.

Part Number: 1140-0401

High G Rack HUB Ethernet Cable

Ethernet cable, RJ45 Ethernet connector to 19-pin LEMO connector for High G Rack Hub (1140-0100).

Part Number: 1140-0400

SMA to BNC Trigger Cable

Part Number: 1116-0400

19-pin Camera Module

19-Pin (Legacy) Camera Module for High-G Rack Hub 1140-0100 supports four 19-pin cameras (w/o LEDs) or, when each camera is used with USB-C to 19-Pin Adapter 1421-0131, supports four USB-C cameras.

Part Number: 1146-0110

16-pin Camera Module

16-Pin Camera Module for High-G Rack Hub 1140-0100 supports four 16-pin cameras (w/o LEDs) or, when each camera is used with USB-C to 16-Pin Adapter 1510-0100, supports four USB-C cameras.

Part Number: 1147-0110

LED Module

LED Module for High-G Rack Hub 1140-0100 supports up to four CrashLED lights.

Part Number: 1148-0100

Additional Accessories

F-Mount

F-mount adapter, provides F-Mount Lens Compatibility for cameras with C/F-Mount.

Part Number: -FM (1400-3000)

PL-Mount

PL-mount adapter, provides PL-mount Lens Compatability for C-mount cameras. Note: PL-mount not for High G applications.

Part Number: -PL (1302-0100)

NXA WiFi Adapter

WiFi module for NX-Air Cameras.

Part Number: 1084-0128

NX-Air High-G Mount

High-G universal mounting plate for NXA cameras.

Part Number: 1084-0190

24V 5-pin Power Supply

24V Power Supply with 5-pin LEMO connector for NXA Option 4.

Part Number: 1102-0153

Previous Next

Note: The NXA4 is a Legacy product and no longer in production. This page remains for informational purposes only.

Previous Next