MODELS
OS3
OSA7
OSA8
OS7
OS8
OS9
OS10-4K
Overview
The Os-series is a new digital high-speed camera designed to operate in the most demanding environments. The salient design feature of the Os 3 are its compact size combined with a wide data bus, making it capable of achieving very high frame rates (up to 7,000 fps) including transfer speeds to high-capacity solid-state (non-volatile) memory. Configurable DDR options include 16GB and 32GB.
Features:
- Optional Solid-State non-volatile memory
- -40+50°C / -40+122°F
- Compact design
- Shock: 200G / Vibration: 40G - All axes Shockproof
- HDSDI Optional
Benefits:
- High capacity image storage
- Extreme environment condition
- Adapts to any enviroment
- Ready for rugged environments
- Live High Definition Playback
More
Configurations
Accessories
Documentation
Standard Accessories
Breakout Cable Power Supply
Power Supply for 19-pin LEMO Breakout Cable 1100-0009. Power Supply is 24V, 5A with 120W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1.2M (3.9 ft.) cable with 4-pin DIN, standard lock type.
Part Number: 1100-0103
Mounting Plate
Mounting Plate
Part Number: 1406-0207
Fan Pack
Fan Pack
Part Number: 1406-0174
Signal Hub and Accessories
19-pin Signal Hub
19-pin Signal Hub, provides power, communication, IRIG, and synchronization. RJ45 Ethernet, 19-pin LEMO, 4-pin Din, 5x BNC connectors for Trigger, Sync In, Sync Out, Ready signal and IRIG. Compatible with all 19-pin cameras and cables. Requires 24V Power Supply 1100-0103 (Sold Separately) for operation.
Part Number: 1098-0107
Breakout Cable Power Supply
Power Supply for 19-pin LEMO Breakout Cable 1100-0009. Power Supply is 24V, 5A with 120W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1.2M (3.9 ft.) cable with 4-pin DIN, standard lock type.
Part Number: 1100-0103
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
IEEE1588 PTP HUB and Accessories
IEEE1588 PTP HUB
IEEE1588 PTP HUB, provides precision timing over Giga Ethernet. Controls up to two cameras and requires IEEE1588 PTP Hub Power Supply 1425-0150. Compatible with 19-pin cameras (NX-Air with exception to the IEEE1588 protocol). Requires IEEE1588 PTP Hub Power Supply 1425-0150 (Sold Separately) for operation.
Part Number: 1425-0100
IEEE1588 PTP Hub Power Supply
Power Supply for the IEEE1588 PTP Hub. Power Supply is 24V, 5A, with 120W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1.2M(3.9 ft.) cable with 4-Pin LEMO connector.
Part Number: 1425-0150
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
IEEE 1588 PTP Hub Battery Plate
IEEE1588 PTP HUB Battery Plate. Allows you to attach a VLOCK Battery to the IEEE1588 PTP HUB. Requires installation at IDT manufacturing facility.
Part Number: 1425-0152
miniHUB and Accessories
3-Port miniHUB
miniHUB, wired and 802.11 ac WiFi wireless control. Provides power, communication, synchronization and control for up to three 19-pin cameras. Requires 24V Power Supply 1424-0100 (Sold Separately) for operation.
Part Number: 1135-0100
4-Port TC Hub Power Supply
Power supply for 4-Port TC16 Hub 1447-0160, 4-Port TC19 Hub (Legacy) 1447-0100 and 4-Port TC30 Hubs 1447-0110 (and GATE). Power Supply is 24V, 9.2A with 221W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1M (3.2 ft.) cable with 8-pin Size 02B LEMO connector.
Part Number: 1424-0100
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
TC19 HUB and Accessories
4-Port TC Hub Power Supply
Power supply for 4-Port TC16 Hub 1447-0160, 4-Port TC19 Hub (Legacy) 1447-0100 and 4-Port TC30 Hubs 1447-0110 (and GATE). Power Supply is 24V, 9.2A with 221W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1M (3.2 ft.) cable with 8-pin Size 02B LEMO connector.
Part Number: 1424-0100
Ethernet Cable
The Mini I/O Ethernet Cable connects Quad Camera Dock 1467-0100, TC16 Hub 1447-0160, TC19 Hub (Legacy)1447-0100 or TC30 Hubs 1447-0110 (and GATE) to a computer or ethernet switch. Cable is 1.5m (5 ft.) with mini I/O and RJ45 connectors.
Part Number: 1447-0400
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
Stackable 45w Battery Module
Stackable 45Wh Battery Module for TC HUBs. Can use up to two Stackable Battery Modules on either a TC19 HUB or TC30 HUB. Includes two clamp locks and screws for attachment. *Battery duration based on number of cameras and functions being used simultaneously.
Part Number: 1447-0125
Mini I/O to Mini I/O Cable
The Mini I/O Daisy Chain cable connects two TC16 Hubs 1447-0160, TC19 (Legacy) Hubs 1447-0100, TC30 Hubs 1447-0110 (and GATE) together or any single TC Hub together with a single Quad Camera Dock 1467-0100. Cable is .5m (1.6 ft.) with mini I/O connectors on both ends.
Part Number: 1421-0403
6 Port Hub and Accessories
19-pin 6-Port Hub
6 Port Hub, provides power, communication, synchronization and control for up to six 19-pin cameras (without LEDs). Integrated battery backup, wired and wireless control. Requires 24V Power Supply 1089-0900 and 8-pin to 8-pin LEMO cable 1091-0901 (Sold Separately) for operation.
Part Number: 1091-1100
6-Port Hub Power Supply
Power Supply for 6-Port Hub 1091-1100. Power Supply is 24V, 10A, 480W with 800W maximum and voltage range of 85-264 VAC, 120-380 VDC. Requires LEMO cable 1091-0901 (Sold Separately) to power hub.
Part Number: 1089-0900
Power Supply Accessory Cable
LEMO cable to connect 6-Port Hub 1091-1100 to 6-Port Hub Power Supply 1089-0900. Cable is .6M (2 ft.) with 8-Pin to 8-Pin LEMO 2M connector.
Part Number: 1091-0901
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
High G Rack Hub and Accessories
High G Rack Hub
16-Port High-G Rack Hub provides power, control, communications and synchronization for a total of sixteen cameras or twelve cameras and four LEDs. Compatible with 16-pin CCM LEMO cameras and with 16-pin and 19-pin USB-C cameras when used with adapters. Compatible with Veritas CrashLED 120 luminaires. Requires Ethernet Cable 1140-0400, Power Supply 1140-0160 and one Power Cable 1140-0401 (Each Sold Separately) when hub is configured with two cameras.
Part Number: 1140-0100
High G Rack Hub Power Cable
Power cable to connect High G Rack Hub 1140-0100 to High Rack Hub Power Supply 1140-0160. Cable is 1.5M(5 ft.) with a 4-pin Amphenol Bayonet locking connector. Requires two power cables per High G Rack Hub for operation.
Part Number: 1140-0401
High G Rack HUB Ethernet Cable
Ethernet cable, RJ45 Ethernet connector to 19-pin LEMO connector for High G Rack Hub (1140-0100).
Part Number: 1140-0400
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
19-pin Camera Module
19-Pin (Legacy) Camera Module for High-G Rack Hub 1140-0100 supports four 19-pin cameras (w/o LEDs) or, when each camera is used with USB-C to 19-Pin Adapter 1421-0131, supports four USB-C cameras.
Part Number: 1146-0110
Additional Accessories
3Wh Battery Module
3Wh Battery Back-up for OS, OSA, CC series cameras. *Battery duration based on number of functions being used simultaneously.
Part Number: 1406-0150
OS High G Mounting Plate
High G Mounting Plate. Rated to 200G Impact and 40G Vibration @ 30s on top, side, or bottom of OS, OSA or CC series cameras.
Part Number: 1406-0101
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
F-Mount
F-mount adapter, provides F-Mount Lens Compatibility for cameras with C/F-Mount.
Part Number: -FM (1400-3000)
PL-Mount
PL-mount adapter, provides PL-mount Lens Compatability for C-mount cameras. Note: PL-mount not for High G applications.
Part Number: -PL (1302-0100)
Metabones Speed Booster, Nikon
Metabones Speed Booster XL 0.64x Adapter for Nikon G-Mount Lens to manual Micro Four Thirds mount cameras. Supports motorized Micro Four Thirds mount cameras with varying degrees of electronic control.
Part Number: 1461-0100
Metabones Speed Booster, Canon
Metabones T Speed Booster XL 0.64x Adapter for Full-Frame Canon EF-Mount Lens to manual Micro Four Thirds Mount cameras. Supports motorized Micro Four Thirds mount cameras with varying degrees of electronic control.
Part Number: 1461-0101
C-Mount Lens Tube
Lens tube, supports C-Mount Lenses for sealed camera configurations or to protect lens from debris.
Part Number: 1420-0100
Overview
The IDT Os Series Version 3 Airborne Camera comes with 16 GB of integrated DDR and can be configured with up to 1 TB of non-volatile solid-state memory. With a maximum resolution of 1920 x 1280 pixels, the OSA7 can record up to 1,350 fps. Latest CMOS sensor technology produces extremely low-noise images. Support for several sensor platforms deliver various resolutions and frame rates. Power Supply, OS Moutining Plate and Break-out cable for easy out-of-the-box operation are included.
Features:
- IP68
- Optional Solid-State non-volatile memory
- High dynamic range
- Max FPS: 1,350 fps
- HDSDI Optional
Benefits:
- Airborne ready
- High capacity image storage
- Low noise images
- High Frame Rates
- Live High Definition Playback
More
Configurations
Accessories
Documentation
Standard Accessories
Breakout Cable Power Supply
Power Supply for 19-pin LEMO Breakout Cable 1100-0009. Power Supply is 24V, 5A with 120W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1.2M (3.9 ft.) cable with 4-pin DIN, standard lock type.
Part Number: 1100-0103
Mounting Plate
Mounting Plate
Part Number: 1406-0207
Fan Pack
Fan Pack
Part Number: 1406-0174
Signal Hub and Accessories
19-pin Signal Hub
19-pin Signal Hub, provides power, communication, IRIG, and synchronization. RJ45 Ethernet, 19-pin LEMO, 4-pin Din, 5x BNC connectors for Trigger, Sync In, Sync Out, Ready signal and IRIG. Compatible with all 19-pin cameras and cables. Requires 24V Power Supply 1100-0103 (Sold Separately) for operation.
Part Number: 1098-0107
Breakout Cable Power Supply
Power Supply for 19-pin LEMO Breakout Cable 1100-0009. Power Supply is 24V, 5A with 120W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1.2M (3.9 ft.) cable with 4-pin DIN, standard lock type.
Part Number: 1100-0103
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
IEEE1588 PTP HUB and Accessories
IEEE1588 PTP HUB
IEEE1588 PTP HUB, provides precision timing over Giga Ethernet. Controls up to two cameras and requires IEEE1588 PTP Hub Power Supply 1425-0150. Compatible with 19-pin cameras (NX-Air with exception to the IEEE1588 protocol). Requires IEEE1588 PTP Hub Power Supply 1425-0150 (Sold Separately) for operation.
Part Number: 1425-0100
IEEE1588 PTP Hub Power Supply
Power Supply for the IEEE1588 PTP Hub. Power Supply is 24V, 5A, with 120W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1.2M(3.9 ft.) cable with 4-Pin LEMO connector.
Part Number: 1425-0150
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
IEEE 1588 PTP Hub Battery Plate
IEEE1588 PTP HUB Battery Plate. Allows you to attach a VLOCK Battery to the IEEE1588 PTP HUB. Requires installation at IDT manufacturing facility.
Part Number: 1425-0152
miniHUB and Accessories
3-Port miniHUB
miniHUB, wired and 802.11 ac WiFi wireless control. Provides power, communication, synchronization and control for up to three 19-pin cameras. Requires 24V Power Supply 1424-0100 (Sold Separately) for operation.
Part Number: 1135-0100
4-Port TC Hub Power Supply
Power supply for 4-Port TC16 Hub 1447-0160, 4-Port TC19 Hub (Legacy) 1447-0100 and 4-Port TC30 Hubs 1447-0110 (and GATE). Power Supply is 24V, 9.2A with 221W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1M (3.2 ft.) cable with 8-pin Size 02B LEMO connector.
Part Number: 1424-0100
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
TC19 HUB and Accessories
4-Port TC Hub Power Supply
Power supply for 4-Port TC16 Hub 1447-0160, 4-Port TC19 Hub (Legacy) 1447-0100 and 4-Port TC30 Hubs 1447-0110 (and GATE). Power Supply is 24V, 9.2A with 221W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1M (3.2 ft.) cable with 8-pin Size 02B LEMO connector.
Part Number: 1424-0100
Ethernet Cable
The Mini I/O Ethernet Cable connects Quad Camera Dock 1467-0100, TC16 Hub 1447-0160, TC19 Hub (Legacy)1447-0100 or TC30 Hubs 1447-0110 (and GATE) to a computer or ethernet switch. Cable is 1.5m (5 ft.) with mini I/O and RJ45 connectors.
Part Number: 1447-0400
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
Stackable 45w Battery Module
Stackable 45Wh Battery Module for TC HUBs. Can use up to two Stackable Battery Modules on either a TC19 HUB or TC30 HUB. Includes two clamp locks and screws for attachment. *Battery duration based on number of cameras and functions being used simultaneously.
Part Number: 1447-0125
Mini I/O to Mini I/O Cable
The Mini I/O Daisy Chain cable connects two TC16 Hubs 1447-0160, TC19 (Legacy) Hubs 1447-0100, TC30 Hubs 1447-0110 (and GATE) together or any single TC Hub together with a single Quad Camera Dock 1467-0100. Cable is .5m (1.6 ft.) with mini I/O connectors on both ends.
Part Number: 1421-0403
6 Port Hub and Accessories
19-pin 6-Port Hub
6 Port Hub, provides power, communication, synchronization and control for up to six 19-pin cameras (without LEDs). Integrated battery backup, wired and wireless control. Requires 24V Power Supply 1089-0900 and 8-pin to 8-pin LEMO cable 1091-0901 (Sold Separately) for operation.
Part Number: 1091-1100
6-Port Hub Power Supply
Power Supply for 6-Port Hub 1091-1100. Power Supply is 24V, 10A, 480W with 800W maximum and voltage range of 85-264 VAC, 120-380 VDC. Requires LEMO cable 1091-0901 (Sold Separately) to power hub.
Part Number: 1089-0900
Power Supply Accessory Cable
LEMO cable to connect 6-Port Hub 1091-1100 to 6-Port Hub Power Supply 1089-0900. Cable is .6M (2 ft.) with 8-Pin to 8-Pin LEMO 2M connector.
Part Number: 1091-0901
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
High G Rack Hub and Accessories
High G Rack Hub
16-Port High-G Rack Hub provides power, control, communications and synchronization for a total of sixteen cameras or twelve cameras and four LEDs. Compatible with 16-pin CCM LEMO cameras and with 16-pin and 19-pin USB-C cameras when used with adapters. Compatible with Veritas CrashLED 120 luminaires. Requires Ethernet Cable 1140-0400, Power Supply 1140-0160 and one Power Cable 1140-0401 (Each Sold Separately) when hub is configured with two cameras.
Part Number: 1140-0100
High G Rack Hub Power Cable
Power cable to connect High G Rack Hub 1140-0100 to High Rack Hub Power Supply 1140-0160. Cable is 1.5M(5 ft.) with a 4-pin Amphenol Bayonet locking connector. Requires two power cables per High G Rack Hub for operation.
Part Number: 1140-0401
High G Rack HUB Ethernet Cable
Ethernet cable, RJ45 Ethernet connector to 19-pin LEMO connector for High G Rack Hub (1140-0100).
Part Number: 1140-0400
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
19-pin Camera Module
19-Pin (Legacy) Camera Module for High-G Rack Hub 1140-0100 supports four 19-pin cameras (w/o LEDs) or, when each camera is used with USB-C to 19-Pin Adapter 1421-0131, supports four USB-C cameras.
Part Number: 1146-0110
Additional Accessories
3Wh Battery Module
3Wh Battery Back-up for OS, OSA, CC series cameras. *Battery duration based on number of functions being used simultaneously.
Part Number: 1406-0150
OS High G Mounting Plate
High G Mounting Plate. Rated to 200G Impact and 40G Vibration @ 30s on top, side, or bottom of OS, OSA or CC series cameras.
Part Number: 1406-0101
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
F-Mount
F-mount adapter, provides F-Mount Lens Compatibility for cameras with C/F-Mount.
Part Number: -FM (1400-3000)
PL-Mount
PL-mount adapter, provides PL-mount Lens Compatability for C-mount cameras. Note: PL-mount not for High G applications.
Part Number: -PL (1302-0100)
Metabones Speed Booster, Nikon
Metabones Speed Booster XL 0.64x Adapter for Nikon G-Mount Lens to manual Micro Four Thirds mount cameras. Supports motorized Micro Four Thirds mount cameras with varying degrees of electronic control.
Part Number: 1461-0100
Metabones Speed Booster, Canon
Metabones T Speed Booster XL 0.64x Adapter for Full-Frame Canon EF-Mount Lens to manual Micro Four Thirds Mount cameras. Supports motorized Micro Four Thirds mount cameras with varying degrees of electronic control.
Part Number: 1461-0101
C-Mount Lens Tube
Lens tube, supports C-Mount Lenses for sealed camera configurations or to protect lens from debris.
Part Number: 1420-0100
Overview
The IDT Os Series Version 3 Airborne Camera comes with 16 GB of integrated DDR and can be configured with up to 1 TB of non-volatile solid-state memory. With a maximum resolution of 1600 x 1200 pixels, the OSA8 can record up to 1,500 fps. Latest CMOS sensor technology produces extremely low-noise images. Support for several sensor platforms deliver various resolutions and frame rates. Power Supply, OS Moutining Plate and Break-out cable for easy out-of-the-box operation are included.
Features:
- IP68
- Optional Solid-State non-volatile memory
- High dynamic range
- Max FPS: 1,500 fps
- HDSDI Optional
Benefits:
- Airborne ready
- High capacity image storage
- Low noise images
- High Frame Rates
- Live High Definition Playback
More
Configurations
Accessories
Documentation
Standard Accessories
Breakout Cable Power Supply
Power Supply for 19-pin LEMO Breakout Cable 1100-0009. Power Supply is 24V, 5A with 120W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1.2M (3.9 ft.) cable with 4-pin DIN, standard lock type.
Part Number: 1100-0103
Mounting Plate
Mounting Plate
Part Number: 1406-0207
Fan Pack
Fan Pack
Part Number: 1406-0174
Signal Hub and Accessories
19-pin Signal Hub
19-pin Signal Hub, provides power, communication, IRIG, and synchronization. RJ45 Ethernet, 19-pin LEMO, 4-pin Din, 5x BNC connectors for Trigger, Sync In, Sync Out, Ready signal and IRIG. Compatible with all 19-pin cameras and cables. Requires 24V Power Supply 1100-0103 (Sold Separately) for operation.
Part Number: 1098-0107
Breakout Cable Power Supply
Power Supply for 19-pin LEMO Breakout Cable 1100-0009. Power Supply is 24V, 5A with 120W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1.2M (3.9 ft.) cable with 4-pin DIN, standard lock type.
Part Number: 1100-0103
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
IEEE1588 PTP HUB and Accessories
IEEE1588 PTP HUB
IEEE1588 PTP HUB, provides precision timing over Giga Ethernet. Controls up to two cameras and requires IEEE1588 PTP Hub Power Supply 1425-0150. Compatible with 19-pin cameras (NX-Air with exception to the IEEE1588 protocol). Requires IEEE1588 PTP Hub Power Supply 1425-0150 (Sold Separately) for operation.
Part Number: 1425-0100
IEEE1588 PTP Hub Power Supply
Power Supply for the IEEE1588 PTP Hub. Power Supply is 24V, 5A, with 120W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1.2M(3.9 ft.) cable with 4-Pin LEMO connector.
Part Number: 1425-0150
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
IEEE 1588 PTP Hub Battery Plate
IEEE1588 PTP HUB Battery Plate. Allows you to attach a VLOCK Battery to the IEEE1588 PTP HUB. Requires installation at IDT manufacturing facility.
Part Number: 1425-0152
miniHUB and Accessories
3-Port miniHUB
miniHUB, wired and 802.11 ac WiFi wireless control. Provides power, communication, synchronization and control for up to three 19-pin cameras. Requires 24V Power Supply 1424-0100 (Sold Separately) for operation.
Part Number: 1135-0100
4-Port TC Hub Power Supply
Power supply for 4-Port TC16 Hub 1447-0160, 4-Port TC19 Hub (Legacy) 1447-0100 and 4-Port TC30 Hubs 1447-0110 (and GATE). Power Supply is 24V, 9.2A with 221W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1M (3.2 ft.) cable with 8-pin Size 02B LEMO connector.
Part Number: 1424-0100
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
TC19 HUB and Accessories
4-Port TC Hub Power Supply
Power supply for 4-Port TC16 Hub 1447-0160, 4-Port TC19 Hub (Legacy) 1447-0100 and 4-Port TC30 Hubs 1447-0110 (and GATE). Power Supply is 24V, 9.2A with 221W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1M (3.2 ft.) cable with 8-pin Size 02B LEMO connector.
Part Number: 1424-0100
Ethernet Cable
The Mini I/O Ethernet Cable connects Quad Camera Dock 1467-0100, TC16 Hub 1447-0160, TC19 Hub (Legacy)1447-0100 or TC30 Hubs 1447-0110 (and GATE) to a computer or ethernet switch. Cable is 1.5m (5 ft.) with mini I/O and RJ45 connectors.
Part Number: 1447-0400
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
Stackable 45w Battery Module
Stackable 45Wh Battery Module for TC HUBs. Can use up to two Stackable Battery Modules on either a TC19 HUB or TC30 HUB. Includes two clamp locks and screws for attachment. *Battery duration based on number of cameras and functions being used simultaneously.
Part Number: 1447-0125
Mini I/O to Mini I/O Cable
The Mini I/O Daisy Chain cable connects two TC16 Hubs 1447-0160, TC19 (Legacy) Hubs 1447-0100, TC30 Hubs 1447-0110 (and GATE) together or any single TC Hub together with a single Quad Camera Dock 1467-0100. Cable is .5m (1.6 ft.) with mini I/O connectors on both ends.
Part Number: 1421-0403
6 Port Hub and Accessories
19-pin 6-Port Hub
6 Port Hub, provides power, communication, synchronization and control for up to six 19-pin cameras (without LEDs). Integrated battery backup, wired and wireless control. Requires 24V Power Supply 1089-0900 and 8-pin to 8-pin LEMO cable 1091-0901 (Sold Separately) for operation.
Part Number: 1091-1100
6-Port Hub Power Supply
Power Supply for 6-Port Hub 1091-1100. Power Supply is 24V, 10A, 480W with 800W maximum and voltage range of 85-264 VAC, 120-380 VDC. Requires LEMO cable 1091-0901 (Sold Separately) to power hub.
Part Number: 1089-0900
Power Supply Accessory Cable
LEMO cable to connect 6-Port Hub 1091-1100 to 6-Port Hub Power Supply 1089-0900. Cable is .6M (2 ft.) with 8-Pin to 8-Pin LEMO 2M connector.
Part Number: 1091-0901
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
High G Rack Hub and Accessories
High G Rack Hub
16-Port High-G Rack Hub provides power, control, communications and synchronization for a total of sixteen cameras or twelve cameras and four LEDs. Compatible with 16-pin CCM LEMO cameras and with 16-pin and 19-pin USB-C cameras when used with adapters. Compatible with Veritas CrashLED 120 luminaires. Requires Ethernet Cable 1140-0400, Power Supply 1140-0160 and one Power Cable 1140-0401 (Each Sold Separately) when hub is configured with two cameras.
Part Number: 1140-0100
High G Rack Hub Power Cable
Power cable to connect High G Rack Hub 1140-0100 to High Rack Hub Power Supply 1140-0160. Cable is 1.5M(5 ft.) with a 4-pin Amphenol Bayonet locking connector. Requires two power cables per High G Rack Hub for operation.
Part Number: 1140-0401
High G Rack HUB Ethernet Cable
Ethernet cable, RJ45 Ethernet connector to 19-pin LEMO connector for High G Rack Hub (1140-0100).
Part Number: 1140-0400
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
19-pin Camera Module
19-Pin (Legacy) Camera Module for High-G Rack Hub 1140-0100 supports four 19-pin cameras (w/o LEDs) or, when each camera is used with USB-C to 19-Pin Adapter 1421-0131, supports four USB-C cameras.
Part Number: 1146-0110
Additional Accessories
3Wh Battery Module
3Wh Battery Back-up for OS, OSA, CC series cameras. *Battery duration based on number of functions being used simultaneously.
Part Number: 1406-0150
OS High G Mounting Plate
High G Mounting Plate. Rated to 200G Impact and 40G Vibration @ 30s on top, side, or bottom of OS, OSA or CC series cameras.
Part Number: 1406-0101
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
F-Mount
F-mount adapter, provides F-Mount Lens Compatibility for cameras with C/F-Mount.
Part Number: -FM (1400-3000)
PL-Mount
PL-mount adapter, provides PL-mount Lens Compatability for C-mount cameras. Note: PL-mount not for High G applications.
Part Number: -PL (1302-0100)
Metabones Speed Booster, Nikon
Metabones Speed Booster XL 0.64x Adapter for Nikon G-Mount Lens to manual Micro Four Thirds mount cameras. Supports motorized Micro Four Thirds mount cameras with varying degrees of electronic control.
Part Number: 1461-0100
Metabones Speed Booster, Canon
Metabones T Speed Booster XL 0.64x Adapter for Full-Frame Canon EF-Mount Lens to manual Micro Four Thirds Mount cameras. Supports motorized Micro Four Thirds mount cameras with varying degrees of electronic control.
Part Number: 1461-0101
C-Mount Lens Tube
Lens tube, supports C-Mount Lenses for sealed camera configurations or to protect lens from debris.
Part Number: 1420-0100
Overview
The Os-series is a new digital high-speed camera designed to operate in the most demanding environments. The salient design feature of the Os 7 are its compact size combined with a wide data bus, making it capable of achieving very high frame rates (up to 4,200 fps) including transfer speeds to high-capacity solid-state (non-volatile) memory. Configurable DDR options include 16GB and 32GB.
Features:
- Optional Solid-State non-volatile memory
- -40+50°C / -40+122°F
- Compact design
- Shock: 200G / Vibration: 40G - All axes Shockproof
- HDSDI Optional
Benefits:
- High capacity image storage
- Extreme environment condition
- Adapts to any enviroment
- Ready for rugged environments
- Live High Definition Playback
More
Configurations
Accessories
Documentation
Standard Accessories
Breakout Cable Power Supply
Power Supply for 19-pin LEMO Breakout Cable 1100-0009. Power Supply is 24V, 5A with 120W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1.2M (3.9 ft.) cable with 4-pin DIN, standard lock type.
Part Number: 1100-0103
Mounting Plate
Mounting Plate
Part Number: 1406-0207
Fan Pack
Fan Pack
Part Number: 1406-0174
Signal Hub and Accessories
19-pin Signal Hub
19-pin Signal Hub, provides power, communication, IRIG, and synchronization. RJ45 Ethernet, 19-pin LEMO, 4-pin Din, 5x BNC connectors for Trigger, Sync In, Sync Out, Ready signal and IRIG. Compatible with all 19-pin cameras and cables. Requires 24V Power Supply 1100-0103 (Sold Separately) for operation.
Part Number: 1098-0107
Breakout Cable Power Supply
Power Supply for 19-pin LEMO Breakout Cable 1100-0009. Power Supply is 24V, 5A with 120W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1.2M (3.9 ft.) cable with 4-pin DIN, standard lock type.
Part Number: 1100-0103
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
IEEE1588 PTP HUB and Accessories
IEEE1588 PTP HUB
IEEE1588 PTP HUB, provides precision timing over Giga Ethernet. Controls up to two cameras and requires IEEE1588 PTP Hub Power Supply 1425-0150. Compatible with 19-pin cameras (NX-Air with exception to the IEEE1588 protocol). Requires IEEE1588 PTP Hub Power Supply 1425-0150 (Sold Separately) for operation.
Part Number: 1425-0100
IEEE1588 PTP Hub Power Supply
Power Supply for the IEEE1588 PTP Hub. Power Supply is 24V, 5A, with 120W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1.2M(3.9 ft.) cable with 4-Pin LEMO connector.
Part Number: 1425-0150
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
IEEE 1588 PTP Hub Battery Plate
IEEE1588 PTP HUB Battery Plate. Allows you to attach a VLOCK Battery to the IEEE1588 PTP HUB. Requires installation at IDT manufacturing facility.
Part Number: 1425-0152
miniHUB and Accessories
3-Port miniHUB
miniHUB, wired and 802.11 ac WiFi wireless control. Provides power, communication, synchronization and control for up to three 19-pin cameras. Requires 24V Power Supply 1424-0100 (Sold Separately) for operation.
Part Number: 1135-0100
4-Port TC Hub Power Supply
Power supply for 4-Port TC16 Hub 1447-0160, 4-Port TC19 Hub (Legacy) 1447-0100 and 4-Port TC30 Hubs 1447-0110 (and GATE). Power Supply is 24V, 9.2A with 221W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1M (3.2 ft.) cable with 8-pin Size 02B LEMO connector.
Part Number: 1424-0100
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
TC19 HUB and Accessories
4-Port TC Hub Power Supply
Power supply for 4-Port TC16 Hub 1447-0160, 4-Port TC19 Hub (Legacy) 1447-0100 and 4-Port TC30 Hubs 1447-0110 (and GATE). Power Supply is 24V, 9.2A with 221W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1M (3.2 ft.) cable with 8-pin Size 02B LEMO connector.
Part Number: 1424-0100
Ethernet Cable
The Mini I/O Ethernet Cable connects Quad Camera Dock 1467-0100, TC16 Hub 1447-0160, TC19 Hub (Legacy)1447-0100 or TC30 Hubs 1447-0110 (and GATE) to a computer or ethernet switch. Cable is 1.5m (5 ft.) with mini I/O and RJ45 connectors.
Part Number: 1447-0400
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
Stackable 45w Battery Module
Stackable 45Wh Battery Module for TC HUBs. Can use up to two Stackable Battery Modules on either a TC19 HUB or TC30 HUB. Includes two clamp locks and screws for attachment. *Battery duration based on number of cameras and functions being used simultaneously.
Part Number: 1447-0125
Mini I/O to Mini I/O Cable
The Mini I/O Daisy Chain cable connects two TC16 Hubs 1447-0160, TC19 (Legacy) Hubs 1447-0100, TC30 Hubs 1447-0110 (and GATE) together or any single TC Hub together with a single Quad Camera Dock 1467-0100. Cable is .5m (1.6 ft.) with mini I/O connectors on both ends.
Part Number: 1421-0403
6 Port Hub and Accessories
19-pin 6-Port Hub
6 Port Hub, provides power, communication, synchronization and control for up to six 19-pin cameras (without LEDs). Integrated battery backup, wired and wireless control. Requires 24V Power Supply 1089-0900 and 8-pin to 8-pin LEMO cable 1091-0901 (Sold Separately) for operation.
Part Number: 1091-1100
6-Port Hub Power Supply
Power Supply for 6-Port Hub 1091-1100. Power Supply is 24V, 10A, 480W with 800W maximum and voltage range of 85-264 VAC, 120-380 VDC. Requires LEMO cable 1091-0901 (Sold Separately) to power hub.
Part Number: 1089-0900
Power Supply Accessory Cable
LEMO cable to connect 6-Port Hub 1091-1100 to 6-Port Hub Power Supply 1089-0900. Cable is .6M (2 ft.) with 8-Pin to 8-Pin LEMO 2M connector.
Part Number: 1091-0901
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
High G Rack Hub and Accessories
High G Rack Hub
16-Port High-G Rack Hub provides power, control, communications and synchronization for a total of sixteen cameras or twelve cameras and four LEDs. Compatible with 16-pin CCM LEMO cameras and with 16-pin and 19-pin USB-C cameras when used with adapters. Compatible with Veritas CrashLED 120 luminaires. Requires Ethernet Cable 1140-0400, Power Supply 1140-0160 and one Power Cable 1140-0401 (Each Sold Separately) when hub is configured with two cameras.
Part Number: 1140-0100
High G Rack Hub Power Cable
Power cable to connect High G Rack Hub 1140-0100 to High Rack Hub Power Supply 1140-0160. Cable is 1.5M(5 ft.) with a 4-pin Amphenol Bayonet locking connector. Requires two power cables per High G Rack Hub for operation.
Part Number: 1140-0401
High G Rack HUB Ethernet Cable
Ethernet cable, RJ45 Ethernet connector to 19-pin LEMO connector for High G Rack Hub (1140-0100).
Part Number: 1140-0400
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
19-pin Camera Module
19-Pin (Legacy) Camera Module for High-G Rack Hub 1140-0100 supports four 19-pin cameras (w/o LEDs) or, when each camera is used with USB-C to 19-Pin Adapter 1421-0131, supports four USB-C cameras.
Part Number: 1146-0110
Additional Accessories
3Wh Battery Module
3Wh Battery Back-up for OS, OSA, CC series cameras. *Battery duration based on number of functions being used simultaneously.
Part Number: 1406-0150
OS High G Mounting Plate
High G Mounting Plate. Rated to 200G Impact and 40G Vibration @ 30s on top, side, or bottom of OS, OSA or CC series cameras.
Part Number: 1406-0101
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
F-Mount
F-mount adapter, provides F-Mount Lens Compatibility for cameras with C/F-Mount.
Part Number: -FM (1400-3000)
PL-Mount
PL-mount adapter, provides PL-mount Lens Compatability for C-mount cameras. Note: PL-mount not for High G applications.
Part Number: -PL (1302-0100)
Metabones Speed Booster, Nikon
Metabones Speed Booster XL 0.64x Adapter for Nikon G-Mount Lens to manual Micro Four Thirds mount cameras. Supports motorized Micro Four Thirds mount cameras with varying degrees of electronic control.
Part Number: 1461-0100
Metabones Speed Booster, Canon
Metabones T Speed Booster XL 0.64x Adapter for Full-Frame Canon EF-Mount Lens to manual Micro Four Thirds Mount cameras. Supports motorized Micro Four Thirds mount cameras with varying degrees of electronic control.
Part Number: 1461-0101
C-Mount Lens Tube
Lens tube, supports C-Mount Lenses for sealed camera configurations or to protect lens from debris.
Part Number: 1420-0100
Overview
The Os-series is a new digital high-speed camera designed to operate in the most demanding environments. The salient design feature of the Os 8 are its compact size combined with a wide data bus, making it capable of achieving very high frame rates (up to 8,000 fps) including transfer speeds to high-capacity solid-state (non-volatile) memory. Configurable DDR options include 16GB and 32GB.
Features:
- Optional Solid-State non-volatile memory
- -40+50°C / -40+122°F
- Compact design
- Shock: 200G / Vibration: 40G - All axes Shockproof
- HDSDI Optional
Benefits:
- High capacity image storage
- Extreme environment condition
- Adapts to any enviroment
- Ready for rugged environments
- Live High Definition Playback
More
Configurations
Accessories
Documentation
Standard Accessories
Breakout Cable Power Supply
Power Supply for 19-pin LEMO Breakout Cable 1100-0009. Power Supply is 24V, 5A with 120W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1.2M (3.9 ft.) cable with 4-pin DIN, standard lock type.
Part Number: 1100-0103
Mounting Plate
Mounting Plate
Part Number: 1406-0207
Fan Pack
Fan Pack
Part Number: 1406-0174
Signal Hub and Accessories
19-pin Signal Hub
19-pin Signal Hub, provides power, communication, IRIG, and synchronization. RJ45 Ethernet, 19-pin LEMO, 4-pin Din, 5x BNC connectors for Trigger, Sync In, Sync Out, Ready signal and IRIG. Compatible with all 19-pin cameras and cables. Requires 24V Power Supply 1100-0103 (Sold Separately) for operation.
Part Number: 1098-0107
Breakout Cable Power Supply
Power Supply for 19-pin LEMO Breakout Cable 1100-0009. Power Supply is 24V, 5A with 120W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1.2M (3.9 ft.) cable with 4-pin DIN, standard lock type.
Part Number: 1100-0103
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
IEEE1588 PTP HUB and Accessories
IEEE1588 PTP HUB
IEEE1588 PTP HUB, provides precision timing over Giga Ethernet. Controls up to two cameras and requires IEEE1588 PTP Hub Power Supply 1425-0150. Compatible with 19-pin cameras (NX-Air with exception to the IEEE1588 protocol). Requires IEEE1588 PTP Hub Power Supply 1425-0150 (Sold Separately) for operation.
Part Number: 1425-0100
IEEE1588 PTP Hub Power Supply
Power Supply for the IEEE1588 PTP Hub. Power Supply is 24V, 5A, with 120W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1.2M(3.9 ft.) cable with 4-Pin LEMO connector.
Part Number: 1425-0150
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
IEEE 1588 PTP Hub Battery Plate
IEEE1588 PTP HUB Battery Plate. Allows you to attach a VLOCK Battery to the IEEE1588 PTP HUB. Requires installation at IDT manufacturing facility.
Part Number: 1425-0152
miniHUB and Accessories
3-Port miniHUB
miniHUB, wired and 802.11 ac WiFi wireless control. Provides power, communication, synchronization and control for up to three 19-pin cameras. Requires 24V Power Supply 1424-0100 (Sold Separately) for operation.
Part Number: 1135-0100
4-Port TC Hub Power Supply
Power supply for 4-Port TC16 Hub 1447-0160, 4-Port TC19 Hub (Legacy) 1447-0100 and 4-Port TC30 Hubs 1447-0110 (and GATE). Power Supply is 24V, 9.2A with 221W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1M (3.2 ft.) cable with 8-pin Size 02B LEMO connector.
Part Number: 1424-0100
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
TC19 HUB and Accessories
4-Port TC Hub Power Supply
Power supply for 4-Port TC16 Hub 1447-0160, 4-Port TC19 Hub (Legacy) 1447-0100 and 4-Port TC30 Hubs 1447-0110 (and GATE). Power Supply is 24V, 9.2A with 221W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1M (3.2 ft.) cable with 8-pin Size 02B LEMO connector.
Part Number: 1424-0100
Ethernet Cable
The Mini I/O Ethernet Cable connects Quad Camera Dock 1467-0100, TC16 Hub 1447-0160, TC19 Hub (Legacy)1447-0100 or TC30 Hubs 1447-0110 (and GATE) to a computer or ethernet switch. Cable is 1.5m (5 ft.) with mini I/O and RJ45 connectors.
Part Number: 1447-0400
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
Stackable 45w Battery Module
Stackable 45Wh Battery Module for TC HUBs. Can use up to two Stackable Battery Modules on either a TC19 HUB or TC30 HUB. Includes two clamp locks and screws for attachment. *Battery duration based on number of cameras and functions being used simultaneously.
Part Number: 1447-0125
Mini I/O to Mini I/O Cable
The Mini I/O Daisy Chain cable connects two TC16 Hubs 1447-0160, TC19 (Legacy) Hubs 1447-0100, TC30 Hubs 1447-0110 (and GATE) together or any single TC Hub together with a single Quad Camera Dock 1467-0100. Cable is .5m (1.6 ft.) with mini I/O connectors on both ends.
Part Number: 1421-0403
6 Port Hub and Accessories
19-pin 6-Port Hub
6 Port Hub, provides power, communication, synchronization and control for up to six 19-pin cameras (without LEDs). Integrated battery backup, wired and wireless control. Requires 24V Power Supply 1089-0900 and 8-pin to 8-pin LEMO cable 1091-0901 (Sold Separately) for operation.
Part Number: 1091-1100
6-Port Hub Power Supply
Power Supply for 6-Port Hub 1091-1100. Power Supply is 24V, 10A, 480W with 800W maximum and voltage range of 85-264 VAC, 120-380 VDC. Requires LEMO cable 1091-0901 (Sold Separately) to power hub.
Part Number: 1089-0900
Power Supply Accessory Cable
LEMO cable to connect 6-Port Hub 1091-1100 to 6-Port Hub Power Supply 1089-0900. Cable is .6M (2 ft.) with 8-Pin to 8-Pin LEMO 2M connector.
Part Number: 1091-0901
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
High G Rack Hub and Accessories
High G Rack Hub
16-Port High-G Rack Hub provides power, control, communications and synchronization for a total of sixteen cameras or twelve cameras and four LEDs. Compatible with 16-pin CCM LEMO cameras and with 16-pin and 19-pin USB-C cameras when used with adapters. Compatible with Veritas CrashLED 120 luminaires. Requires Ethernet Cable 1140-0400, Power Supply 1140-0160 and one Power Cable 1140-0401 (Each Sold Separately) when hub is configured with two cameras.
Part Number: 1140-0100
High G Rack Hub Power Cable
Power cable to connect High G Rack Hub 1140-0100 to High Rack Hub Power Supply 1140-0160. Cable is 1.5M(5 ft.) with a 4-pin Amphenol Bayonet locking connector. Requires two power cables per High G Rack Hub for operation.
Part Number: 1140-0401
High G Rack HUB Ethernet Cable
Ethernet cable, RJ45 Ethernet connector to 19-pin LEMO connector for High G Rack Hub (1140-0100).
Part Number: 1140-0400
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
19-pin Camera Module
19-Pin (Legacy) Camera Module for High-G Rack Hub 1140-0100 supports four 19-pin cameras (w/o LEDs) or, when each camera is used with USB-C to 19-Pin Adapter 1421-0131, supports four USB-C cameras.
Part Number: 1146-0110
Additional Accessories
3Wh Battery Module
3Wh Battery Back-up for OS, OSA, CC series cameras. *Battery duration based on number of functions being used simultaneously.
Part Number: 1406-0150
OS High G Mounting Plate
High G Mounting Plate. Rated to 200G Impact and 40G Vibration @ 30s on top, side, or bottom of OS, OSA or CC series cameras.
Part Number: 1406-0101
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
F-Mount
F-mount adapter, provides F-Mount Lens Compatibility for cameras with C/F-Mount.
Part Number: -FM (1400-3000)
PL-Mount
PL-mount adapter, provides PL-mount Lens Compatability for C-mount cameras. Note: PL-mount not for High G applications.
Part Number: -PL (1302-0100)
Metabones Speed Booster, Nikon
Metabones Speed Booster XL 0.64x Adapter for Nikon G-Mount Lens to manual Micro Four Thirds mount cameras. Supports motorized Micro Four Thirds mount cameras with varying degrees of electronic control.
Part Number: 1461-0100
Metabones Speed Booster, Canon
Metabones T Speed Booster XL 0.64x Adapter for Full-Frame Canon EF-Mount Lens to manual Micro Four Thirds Mount cameras. Supports motorized Micro Four Thirds mount cameras with varying degrees of electronic control.
Part Number: 1461-0101
C-Mount Lens Tube
Lens tube, supports C-Mount Lenses for sealed camera configurations or to protect lens from debris.
Part Number: 1420-0100
Overview
The Os-series is a new digital high-speed camera designed to operate in the most demanding environments. The salient design feature of the Os 9 are its compact size combined with a wide data bus, making it capable of achieving very high frame rates (up to 3,000 fps) including transfer speeds to high-capacity solid-state (non-volatile) memory. Configurable DDR options include 16GB and 32GB.
Features:
- Optional Solid-State non-volatile memory
- -40+50°C / -40+122°F
- Compact design
- Shock: 200G / Vibration: 40G - All axes Shockproof
- HDSDI Optional
Benefits:
- High capacity image storage
- Extreme environment condition
- Adapts to any enviroment
- Ready for rugged environments
- Live High Definition Playback
More
Configurations
Accessories
Documentation
Standard Accessories
Breakout Cable Power Supply
Power Supply for 19-pin LEMO Breakout Cable 1100-0009. Power Supply is 24V, 5A with 120W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1.2M (3.9 ft.) cable with 4-pin DIN, standard lock type.
Part Number: 1100-0103
Mounting Plate
Mounting Plate
Part Number: 1406-0207
Fan Pack
Fan Pack
Part Number: 1406-0174
Signal Hub and Accessories
19-pin Signal Hub
19-pin Signal Hub, provides power, communication, IRIG, and synchronization. RJ45 Ethernet, 19-pin LEMO, 4-pin Din, 5x BNC connectors for Trigger, Sync In, Sync Out, Ready signal and IRIG. Compatible with all 19-pin cameras and cables. Requires 24V Power Supply 1100-0103 (Sold Separately) for operation.
Part Number: 1098-0107
Breakout Cable Power Supply
Power Supply for 19-pin LEMO Breakout Cable 1100-0009. Power Supply is 24V, 5A with 120W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1.2M (3.9 ft.) cable with 4-pin DIN, standard lock type.
Part Number: 1100-0103
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
IEEE1588 PTP HUB and Accessories
IEEE1588 PTP HUB
IEEE1588 PTP HUB, provides precision timing over Giga Ethernet. Controls up to two cameras and requires IEEE1588 PTP Hub Power Supply 1425-0150. Compatible with 19-pin cameras (NX-Air with exception to the IEEE1588 protocol). Requires IEEE1588 PTP Hub Power Supply 1425-0150 (Sold Separately) for operation.
Part Number: 1425-0100
IEEE1588 PTP Hub Power Supply
Power Supply for the IEEE1588 PTP Hub. Power Supply is 24V, 5A, with 120W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1.2M(3.9 ft.) cable with 4-Pin LEMO connector.
Part Number: 1425-0150
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
IEEE 1588 PTP Hub Battery Plate
IEEE1588 PTP HUB Battery Plate. Allows you to attach a VLOCK Battery to the IEEE1588 PTP HUB. Requires installation at IDT manufacturing facility.
Part Number: 1425-0152
miniHUB and Accessories
3-Port miniHUB
miniHUB, wired and 802.11 ac WiFi wireless control. Provides power, communication, synchronization and control for up to three 19-pin cameras. Requires 24V Power Supply 1424-0100 (Sold Separately) for operation.
Part Number: 1135-0100
4-Port TC Hub Power Supply
Power supply for 4-Port TC16 Hub 1447-0160, 4-Port TC19 Hub (Legacy) 1447-0100 and 4-Port TC30 Hubs 1447-0110 (and GATE). Power Supply is 24V, 9.2A with 221W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1M (3.2 ft.) cable with 8-pin Size 02B LEMO connector.
Part Number: 1424-0100
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
TC19 HUB and Accessories
4-Port TC Hub Power Supply
Power supply for 4-Port TC16 Hub 1447-0160, 4-Port TC19 Hub (Legacy) 1447-0100 and 4-Port TC30 Hubs 1447-0110 (and GATE). Power Supply is 24V, 9.2A with 221W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1M (3.2 ft.) cable with 8-pin Size 02B LEMO connector.
Part Number: 1424-0100
Ethernet Cable
The Mini I/O Ethernet Cable connects Quad Camera Dock 1467-0100, TC16 Hub 1447-0160, TC19 Hub (Legacy)1447-0100 or TC30 Hubs 1447-0110 (and GATE) to a computer or ethernet switch. Cable is 1.5m (5 ft.) with mini I/O and RJ45 connectors.
Part Number: 1447-0400
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
Stackable 45w Battery Module
Stackable 45Wh Battery Module for TC HUBs. Can use up to two Stackable Battery Modules on either a TC19 HUB or TC30 HUB. Includes two clamp locks and screws for attachment. *Battery duration based on number of cameras and functions being used simultaneously.
Part Number: 1447-0125
Mini I/O to Mini I/O Cable
The Mini I/O Daisy Chain cable connects two TC16 Hubs 1447-0160, TC19 (Legacy) Hubs 1447-0100, TC30 Hubs 1447-0110 (and GATE) together or any single TC Hub together with a single Quad Camera Dock 1467-0100. Cable is .5m (1.6 ft.) with mini I/O connectors on both ends.
Part Number: 1421-0403
6 Port Hub and Accessories
19-pin 6-Port Hub
6 Port Hub, provides power, communication, synchronization and control for up to six 19-pin cameras (without LEDs). Integrated battery backup, wired and wireless control. Requires 24V Power Supply 1089-0900 and 8-pin to 8-pin LEMO cable 1091-0901 (Sold Separately) for operation.
Part Number: 1091-1100
6-Port Hub Power Supply
Power Supply for 6-Port Hub 1091-1100. Power Supply is 24V, 10A, 480W with 800W maximum and voltage range of 85-264 VAC, 120-380 VDC. Requires LEMO cable 1091-0901 (Sold Separately) to power hub.
Part Number: 1089-0900
Power Supply Accessory Cable
LEMO cable to connect 6-Port Hub 1091-1100 to 6-Port Hub Power Supply 1089-0900. Cable is .6M (2 ft.) with 8-Pin to 8-Pin LEMO 2M connector.
Part Number: 1091-0901
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
High G Rack Hub and Accessories
High G Rack Hub
16-Port High-G Rack Hub provides power, control, communications and synchronization for a total of sixteen cameras or twelve cameras and four LEDs. Compatible with 16-pin CCM LEMO cameras and with 16-pin and 19-pin USB-C cameras when used with adapters. Compatible with Veritas CrashLED 120 luminaires. Requires Ethernet Cable 1140-0400, Power Supply 1140-0160 and one Power Cable 1140-0401 (Each Sold Separately) when hub is configured with two cameras.
Part Number: 1140-0100
High G Rack Hub Power Cable
Power cable to connect High G Rack Hub 1140-0100 to High Rack Hub Power Supply 1140-0160. Cable is 1.5M(5 ft.) with a 4-pin Amphenol Bayonet locking connector. Requires two power cables per High G Rack Hub for operation.
Part Number: 1140-0401
High G Rack HUB Ethernet Cable
Ethernet cable, RJ45 Ethernet connector to 19-pin LEMO connector for High G Rack Hub (1140-0100).
Part Number: 1140-0400
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
19-pin Camera Module
19-Pin (Legacy) Camera Module for High-G Rack Hub 1140-0100 supports four 19-pin cameras (w/o LEDs) or, when each camera is used with USB-C to 19-Pin Adapter 1421-0131, supports four USB-C cameras.
Part Number: 1146-0110
Additional Accessories
3Wh Battery Module
3Wh Battery Back-up for OS, OSA, CC series cameras. *Battery duration based on number of functions being used simultaneously.
Part Number: 1406-0150
OS High G Mounting Plate
High G Mounting Plate. Rated to 200G Impact and 40G Vibration @ 30s on top, side, or bottom of OS, OSA or CC series cameras.
Part Number: 1406-0101
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
F-Mount
F-mount adapter, provides F-Mount Lens Compatibility for cameras with C/F-Mount.
Part Number: -FM (1400-3000)
PL-Mount
PL-mount adapter, provides PL-mount Lens Compatability for C-mount cameras. Note: PL-mount not for High G applications.
Part Number: -PL (1302-0100)
Metabones Speed Booster, Nikon
Metabones Speed Booster XL 0.64x Adapter for Nikon G-Mount Lens to manual Micro Four Thirds mount cameras. Supports motorized Micro Four Thirds mount cameras with varying degrees of electronic control.
Part Number: 1461-0100
Metabones Speed Booster, Canon
Metabones T Speed Booster XL 0.64x Adapter for Full-Frame Canon EF-Mount Lens to manual Micro Four Thirds Mount cameras. Supports motorized Micro Four Thirds mount cameras with varying degrees of electronic control.
Part Number: 1461-0101
C-Mount Lens Tube
Lens tube, supports C-Mount Lenses for sealed camera configurations or to protect lens from debris.
Part Number: 1420-0100
Overview
The Os-series is a new digital high-speed camera designed to operate in the most demanding environments. The salient design feature of the Os 10 are its compact size combined with a wide data bus, making it capable of achieving very high frame rates (up to 1,000 fps) including transfer speeds to high-capacity solid-state (non-volatile) memory. Configurable DDR options include 16GB and 32GB.
Features:
- Optional Solid-State non-volatile memory
- -40+50°C / -40+122°F
- Compact design
- Shock: 200G / Vibration: 40G - All axes Shockproof
- HDSDI Optional
Benefits:
- High capacity image storage
- Extreme environment condition
- Adapts to any enviroment
- Ready for rugged environments
- Live High Definition Playback
More
Configurations
Accessories
Documentation
Standard Accessories
Breakout Cable Power Supply
Power Supply for 19-pin LEMO Breakout Cable 1100-0009. Power Supply is 24V, 5A with 120W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1.2M (3.9 ft.) cable with 4-pin DIN, standard lock type.
Part Number: 1100-0103
Mounting Plate
Mounting Plate
Part Number: 1406-0207
Fan Pack
Fan Pack
Part Number: 1406-0174
Signal Hub and Accessories
19-pin Signal Hub
19-pin Signal Hub, provides power, communication, IRIG, and synchronization. RJ45 Ethernet, 19-pin LEMO, 4-pin Din, 5x BNC connectors for Trigger, Sync In, Sync Out, Ready signal and IRIG. Compatible with all 19-pin cameras and cables. Requires 24V Power Supply 1100-0103 (Sold Separately) for operation.
Part Number: 1098-0107
Breakout Cable Power Supply
Power Supply for 19-pin LEMO Breakout Cable 1100-0009. Power Supply is 24V, 5A with 120W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1.2M (3.9 ft.) cable with 4-pin DIN, standard lock type.
Part Number: 1100-0103
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
IEEE1588 PTP HUB and Accessories
IEEE1588 PTP HUB
IEEE1588 PTP HUB, provides precision timing over Giga Ethernet. Controls up to two cameras and requires IEEE1588 PTP Hub Power Supply 1425-0150. Compatible with 19-pin cameras (NX-Air with exception to the IEEE1588 protocol). Requires IEEE1588 PTP Hub Power Supply 1425-0150 (Sold Separately) for operation.
Part Number: 1425-0100
IEEE1588 PTP Hub Power Supply
Power Supply for the IEEE1588 PTP Hub. Power Supply is 24V, 5A, with 120W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1.2M(3.9 ft.) cable with 4-Pin LEMO connector.
Part Number: 1425-0150
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
IEEE 1588 PTP Hub Battery Plate
IEEE1588 PTP HUB Battery Plate. Allows you to attach a VLOCK Battery to the IEEE1588 PTP HUB. Requires installation at IDT manufacturing facility.
Part Number: 1425-0152
miniHUB and Accessories
3-Port miniHUB
miniHUB, wired and 802.11 ac WiFi wireless control. Provides power, communication, synchronization and control for up to three 19-pin cameras. Requires 24V Power Supply 1424-0100 (Sold Separately) for operation.
Part Number: 1135-0100
4-Port TC Hub Power Supply
Power supply for 4-Port TC16 Hub 1447-0160, 4-Port TC19 Hub (Legacy) 1447-0100 and 4-Port TC30 Hubs 1447-0110 (and GATE). Power Supply is 24V, 9.2A with 221W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1M (3.2 ft.) cable with 8-pin Size 02B LEMO connector.
Part Number: 1424-0100
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
TC19 HUB and Accessories
4-Port TC Hub Power Supply
Power supply for 4-Port TC16 Hub 1447-0160, 4-Port TC19 Hub (Legacy) 1447-0100 and 4-Port TC30 Hubs 1447-0110 (and GATE). Power Supply is 24V, 9.2A with 221W maximum and voltage range of 85-264 VAC, 120-370 VDC. Includes 1M (3.2 ft.) cable with 8-pin Size 02B LEMO connector.
Part Number: 1424-0100
Ethernet Cable
The Mini I/O Ethernet Cable connects Quad Camera Dock 1467-0100, TC16 Hub 1447-0160, TC19 Hub (Legacy)1447-0100 or TC30 Hubs 1447-0110 (and GATE) to a computer or ethernet switch. Cable is 1.5m (5 ft.) with mini I/O and RJ45 connectors.
Part Number: 1447-0400
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
Stackable 45w Battery Module
Stackable 45Wh Battery Module for TC HUBs. Can use up to two Stackable Battery Modules on either a TC19 HUB or TC30 HUB. Includes two clamp locks and screws for attachment. *Battery duration based on number of cameras and functions being used simultaneously.
Part Number: 1447-0125
Mini I/O to Mini I/O Cable
The Mini I/O Daisy Chain cable connects two TC16 Hubs 1447-0160, TC19 (Legacy) Hubs 1447-0100, TC30 Hubs 1447-0110 (and GATE) together or any single TC Hub together with a single Quad Camera Dock 1467-0100. Cable is .5m (1.6 ft.) with mini I/O connectors on both ends.
Part Number: 1421-0403
6 Port Hub and Accessories
19-pin 6-Port Hub
6 Port Hub, provides power, communication, synchronization and control for up to six 19-pin cameras (without LEDs). Integrated battery backup, wired and wireless control. Requires 24V Power Supply 1089-0900 and 8-pin to 8-pin LEMO cable 1091-0901 (Sold Separately) for operation.
Part Number: 1091-1100
6-Port Hub Power Supply
Power Supply for 6-Port Hub 1091-1100. Power Supply is 24V, 10A, 480W with 800W maximum and voltage range of 85-264 VAC, 120-380 VDC. Requires LEMO cable 1091-0901 (Sold Separately) to power hub.
Part Number: 1089-0900
Power Supply Accessory Cable
LEMO cable to connect 6-Port Hub 1091-1100 to 6-Port Hub Power Supply 1089-0900. Cable is .6M (2 ft.) with 8-Pin to 8-Pin LEMO 2M connector.
Part Number: 1091-0901
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
High G Rack Hub and Accessories
High G Rack Hub
16-Port High-G Rack Hub provides power, control, communications and synchronization for a total of sixteen cameras or twelve cameras and four LEDs. Compatible with 16-pin CCM LEMO cameras and with 16-pin and 19-pin USB-C cameras when used with adapters. Compatible with Veritas CrashLED 120 luminaires. Requires Ethernet Cable 1140-0400, Power Supply 1140-0160 and one Power Cable 1140-0401 (Each Sold Separately) when hub is configured with two cameras.
Part Number: 1140-0100
High G Rack Hub Power Cable
Power cable to connect High G Rack Hub 1140-0100 to High Rack Hub Power Supply 1140-0160. Cable is 1.5M(5 ft.) with a 4-pin Amphenol Bayonet locking connector. Requires two power cables per High G Rack Hub for operation.
Part Number: 1140-0401
High G Rack HUB Ethernet Cable
Ethernet cable, RJ45 Ethernet connector to 19-pin LEMO connector for High G Rack Hub (1140-0100).
Part Number: 1140-0400
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
19-pin Camera Module
19-Pin (Legacy) Camera Module for High-G Rack Hub 1140-0100 supports four 19-pin cameras (w/o LEDs) or, when each camera is used with USB-C to 19-Pin Adapter 1421-0131, supports four USB-C cameras.
Part Number: 1146-0110
Additional Accessories
3Wh Battery Module
3Wh Battery Back-up for OS, OSA, CC series cameras. *Battery duration based on number of functions being used simultaneously.
Part Number: 1406-0150
OS High G Mounting Plate
High G Mounting Plate. Rated to 200G Impact and 40G Vibration @ 30s on top, side, or bottom of OS, OSA or CC series cameras.
Part Number: 1406-0101
SMA to BNC Trigger Cable
The SMA to BNC Cable is used between SMA trigger and sync connectors on hubs and devices with BNC connectors. Cable is compatible with all camera series and hubs and is 1.5m (5 ft.) with one SMA male connector and one BNC male connector.
Part Number: 1116-0400
F-Mount
F-mount adapter, provides F-Mount Lens Compatibility for cameras with C/F-Mount.
Part Number: -FM (1400-3000)
PL-Mount
PL-mount adapter, provides PL-mount Lens Compatability for C-mount cameras. Note: PL-mount not for High G applications.
Part Number: -PL (1302-0100)
Metabones Speed Booster, Nikon
Metabones Speed Booster XL 0.64x Adapter for Nikon G-Mount Lens to manual Micro Four Thirds mount cameras. Supports motorized Micro Four Thirds mount cameras with varying degrees of electronic control.
Part Number: 1461-0100
Metabones Speed Booster, Canon
Metabones T Speed Booster XL 0.64x Adapter for Full-Frame Canon EF-Mount Lens to manual Micro Four Thirds Mount cameras. Supports motorized Micro Four Thirds mount cameras with varying degrees of electronic control.
Part Number: 1461-0101
C-Mount Lens Tube
Lens tube, supports C-Mount Lenses for sealed camera configurations or to protect lens from debris.
Part Number: 1420-0100