Y3HDiablo

Fully equipped with a 1280x1024 pixel array, maximum resolution recording speeds reach up to 1470 fps at HD resolution, transforming each second of real time into one minute of film time. At any speed, the internal memory records up to 10471 frames, equivalent to 7 minute, 16.25 seconds.

Y5HDiablo

With its 4 megapixel sensor, Y5HDiablo makes Hollywood proven high speed. 30 bits of color depth ensure accurate image reproduction for each of the 730 frames per second at 2336x1728 resolution. The included internal RAM records 8 seconds of real time, creating nearly 4 minutes playback at maximum resolution and framerate.

Battery Pack

The IDT Backup Battery for the Y-series delivers regulated 12 Volt current, capable of running the camera between 30-60 min depending on the Model an Memory. The Lithium Ion Battery offers built in temperature and Load protection. The internal switch logic allows the The Battery to charge while supplying DC power to the camera and will continue to supply power if AC power is interrupted. The LED Indicator shows the status of the Battery at all times.

Part-number: Y-BP

UPS

The uninterruptible power supply provides regulated 12 volt for Y- and N-series cameras. This quality power supply can run one Y camera or four N cameras up to 3 hours. To recharge the UPS from a fully discharged state it will take about 2,5 hours.

Part-number: Y-UPS

WiFi Module

This interface provides for control of the camera independent of a computer using iphone like devices insuring maximum portability. However when the camera is connected to a computer control can be toggle between the WiFi module and the computer, while keeping all the camera operational parameters in perfect synchronization.

Part-number: Y-FI

PL Mount

One inch format sensors allow the camera body to include C- Lens Mount. Using a Precision Diascope, every camera is shimmed for perfect back focus. as a result our unique adaptor design lets the end user add PL-mount to the body without further modifications by the end user.

Part-number: Y-PL

F Mount

IDT one inch format sensors allow the camera body to include C- Lens Mount. using a Precision Diascope, every camera is shimmed for perfect back focus. As a result our unique adaptor design lets the end user add F-mount to the body without further modifications by the end user.

Part-number: Y-FM

Mounting Baseplate

Under certain mounting conditions critical airflow to the bottom of the camera can be obstructed. The base plate is designed to allow the end user many mounting options, maintaining critical air flow to the camera.

Part-number: Y-MB

ARRI Mount

The available Arri mount brings further flexibility to the system. Compatible with a number of tilt and pan tripod heads, the mount is also ready for rods for custom rig construction and attachment. Whether atop a crane, or on the shoulder, the Arri mount accommodates the need of the shoot.