o-product-hero

O SERIES CAMERA

O MODELS
O9
O10
o-series-main-image

Overview

The O Series cameras are compact, rugged, and have the most integrated image storage among the small form factor cameras - up to 32GB of integrated DDR. A 240GB removable SSD comes standard along with 16GB DDR, HDSDI, GPS, Backup battery, Rear Fan, Lower Fan and Manual Micro Four Thirds Mount. O cameras are configured with active cooling and an angled side connector. IDT

Features:

  • Global Shutter
  • GPS and IRIG
  • Integrated Lens Control
  • Removable media
  • Back-up battery

Benefits:

  • Crisp, blur free imaging
  • Flexible timing and synchronization
  • Remote focus and iris
  • Non-volatile image storage
  • Power redundancy
At A Glance
Click, drag and release handle bar to compare key attributes.
O9
Resolution
Maximum Frame Rate
Max Record Time (16 GB)
Streaming Frame Rate
More
Configurations
Accessories
Documentation

Specification Sheets


O9
19-pin Signal Hub
1x 19-pin Signal Hub provides power, communication, IRIG, and synchronization. 1x RJ45 Ethernet, 1x 19-pin LEMO, 1x 4-pin Din, 5x BNC connectors for Trigger, Sync In, Sync Out, Ready signal and IRIG. Compatible with all 19-pin cameras.
Part Number: 1098-0107
High G Rack Hub
1x High G Rack Hub. Power, communicate, synchronize and control up to 16 different IDT Cameras or Veritas LEDs in multiple configurations. Compatible with IDT?s 16-pin & 19-pin cameras. Compatible Veritas LEDs include CrashLED 160, LED 12, LED 8, or FlexLED. The High G Rack Hub includes base with power ports, internal GPS/IRIG/1PPS timing, Status connector for monitoring, 2x Power cables 1140-0401, 1x Ethernet cable 1140-0400, 1x Trigger cable 1116-0400. (All modules sold separately).
Part Number: 1140-0100
19-pin Camera Module
1x 19-pin Camera Module for up to 4x 19-pin cameras (w/o LEDs). Requires High G Rack Hub (1140-0100).
Part Number: 1146-0110
16-pin Camera Module
1x 16-pin Camera Module for up to 4x 16-pin cameras (w/o LEDs). Requires High G Rack Hub (1140-0100).
Part Number: 1147-0110
LED Module
1x LED Module for up to 4x CrashLED 160, LED 12, LED 8, or FlexLED. Requires High G Rack Hub (1140-0100).
Part Number: 1148-0100
Ethernet Cable
1x RJ45 Ethernet connector to 19-pin LEMO connector for High G Rack Hub (1140-0100).
Part Number: 1140-0400
Power Cable
1x Power cable for High G Rack Hub. 4-pin Amphenol Bayonet locking connector. For use with High G Rack Hub (1140-0100) only.
Part Number: 1140-0401
IEEE1588 PTP HUB
1x IEEE1588 PTP HUB provides precision timing over Giga Ethernet and synchronizes any IEEE1588 supported device that shares the same network. Controls up to two cameras and includes IEEE1588 PTP Hub Power Supply 1425-0150. Compatible with 19-pin cameras (NX-Air with exception to the IEEE1588 protocol). The IEEE1588 PTP HUB also compatible with V-Lock Batteries.
Part Number: 1425-0100
F-Mount
Provides F-Mount Lens Compatibility. Can replace with C-mount.
Part Number: 1400-3000
3-Port miniHUB
1x miniHUB wired and ac WiFi wireless control. Provides power, communication, synchronization and control for up to three 19-pin cameras. Power supply 1424-0100 and trigger cable 1116-0400 included.
Part Number: 1135-0100
24V Power Supply
24V Power Supply for OS Breakout Cable 1100-0009
Part Number: 1100-0103
19-pin 6-Port Hub
1x 6 Port Hub, provides power, communication, synchronization and control for up to six 19-pin cameras (without LEDs). Integrated battery backup, wired and wireless control.
Part Number: 1091-1100
6-Port Hub Power Supply
1x 24V Power Supply for NX-HUB 1091-0900 and NXA-HUB 1091-1100 includes 1091-0901 cable.
Part Number: 1089-0900
Power Supply Accessory Cable
1x 8 pin to 8 pin LEMO cable for connection from 6 Port Hub 1091-1100 to 24V Power Supply 1089-0900.
Part Number: 1091-0901
19-pin 5 Meter Camera Cable
1x 19-pin to 19-pin LEMO straight cable, 5m. Compatible with 19-pin cameras and hubs.
Part Number: 1084-0200-1
19-pin 10 Meter Camera Cable
1x 19-pin to 19-pin LEMO straight cable, 10m. Compatible with 19-pin cameras and hubs.
Part Number: 1084-0200-3
19-pin 20 Meter Camera Cable
1x 19-pin to 19-pin LEMO straight cable, 20m. Compatible with 19-pin cameras and hubs.
Part Number: 1084-0200-5
PL-Mount
Provides PL-Mount Lens Compatability. Can replace with C-mount. Note: PL-mount not for High G applications.
Part Number: 1302-0100
19-pin 90° 5 Meter Cable
1x 19-pin to 19-pin LEMO cable, attaches to camera at a downward 90° angle, 5m. Compatible with 19-pin cameras and hubs.
Part Number: 1123-0400-1
19-pin 90° 10 Meter Cable
1x 19-pin to 19-pin LEMO cable, attaches to camera at a downward 90° angle, 10m. Compatible with 19-pin cameras and hubs.
Part Number: 1123-0400-3
19-pin 90° 20 Meter Cable
1x 19-pin to 19-pin LEMO cable, attaches to camera at a downward 90° angle, 20m. Compatible with 19-pin cameras and hubs.
Part Number: 1123-0400-5
24V Power Supply
1x 24V Power Supply with 8-pin LEMO connector for miniHUB 1135-0100, TC19 HUB 1447-0100 and TC30 HUB 1447-0110.
Part Number: 1424-0100
Micro Four Thirds Mount
Manual Micro Four Thirds Mount for O, OS, OSA, and CC model cameras. Can be replaced at manufacturer facility.
Part Number: 1501-0100
IEEE1588 PTP Hub Battery & Battery Plate
Package includes IEEE 1588 PTP Hub Battery 1425-0151 and IEEE 1588 PTP Hub Battery Plate 1425-0152. Add on at manufacturing facility.
Part Number: 1425-7001
IEEE1588 PTP Hub Power Supply
1x 24V Power Supply with 4-Pin LEMO connector for IEEE1588 PTP HUB 1425-0100.
Part Number: 1425-0150
IEEE 1588 PTP Hub Battery
IEEE 1588 PTP Hub Battery
Part Number: 1425-0151
IEEE 1588 PTP Hub Battery Plate
IEEE 1588 PTP Hub Battery Plate
Part Number: 1425-0152
Break-out Cable
1x 19-pin LEMO to 4x BNC, 1x DIN power and 1x RJ45 break-out cable, 5ft. Compatible with 19-pin cameras and 19-pin adapters.
Part Number: 1100-0009
Short Integration
Add Short Integration to cameras configuration. Short Integration option: 600 nsec exposure. (This option is subject to U.S. export regulations.)
Part Number: -SI
PIV
Add PIV to cameras configuration. Includes a timing interface to synchronize and trigger any laser. Supports double exposure with 600 nanosecond interframe time. Includes dongle with proVISION software.
Part Number: -PIV
TC19
TC19 HUB - 4 Port 19-pin Timing Control Hub. Provides power, communication, synchronization and control for up to four 19-pin cameras (without LEDs) or CrashCam mini with USB-C connector (Requires USB-C to 19-pin Adapter 1421-0131). Dual battery connector ports allow for untethered operation.
Part Number: 1447-0100
TC19 and TC30 Battery Module
45 Watt Hour Battery Module for Timing Control Hubs
Part Number: 1447-0130
TC HUB Ethernet Cable
1x Mini I/O connector to RJ45 connector, 1m Ethernet cable for TC19 HUB 1447-0100, TC30 HUB 1447-0110, or Single Port HUB 1450-0100.
Part Number: 1447-0400
SMA to BNC Cable
1x SMA Male to 1x BNC Male, 5.0 ft. Can be used with trigger pickle switch or between SMA connectors on hubs and devices with BNC connectors. Compatible with all camera series and hubs.
Part Number: 1116-0400
o-series-break-out-cable-configuration
o-series-main-image

Overview

The O Series cameras are compact, rugged, and have the most integrated image storage among the small form factor cameras - up to 32GB of integrated DDR. A 240GB removable SSD comes standard along with 16GB DDR, HDSDI, GPS, Backup battery, Rear Fan, Lower Fan and Manual Micro Four Thirds Mount. O cameras are configured with active cooling and an angled side connector. IDT

Features:

  • Global Shutter
  • GPS and IRIG
  • Integrated Lens Control
  • Removable media
  • Back-up battery

Benefits:

  • Crisp, blur free imaging
  • Flexible timing and synchronization
  • Remote focus and iris
  • Non-volatile image storage
  • Power redundancy
At A Glance
Click, drag and release handle bar to compare key attributes.
O10-4K
Resolution
Maximum Frame Rate
Max Record Time (16 GB)
Streaming Frame Rate
More
Configurations
Accessories
Documentation

Specification Sheets


O10-4K
19-pin Signal Hub
1x 19-pin Signal Hub provides power, communication, IRIG, and synchronization. 1x RJ45 Ethernet, 1x 19-pin LEMO, 1x 4-pin Din, 5x BNC connectors for Trigger, Sync In, Sync Out, Ready signal and IRIG. Compatible with all 19-pin cameras.
Part Number: 1098-0107
High G Rack Hub
1x High G Rack Hub. Power, communicate, synchronize and control up to 16 different IDT Cameras or Veritas LEDs in multiple configurations. Compatible with IDT?s 16-pin & 19-pin cameras. Compatible Veritas LEDs include CrashLED 160, LED 12, LED 8, or FlexLED. The High G Rack Hub includes base with power ports, internal GPS/IRIG/1PPS timing, Status connector for monitoring, 2x Power cables 1140-0401, 1x Ethernet cable 1140-0400, 1x Trigger cable 1116-0400. (All modules sold separately).
Part Number: 1140-0100
19-pin Camera Module
1x 19-pin Camera Module for up to 4x 19-pin cameras (w/o LEDs). Requires High G Rack Hub (1140-0100).
Part Number: 1146-0110
16-pin Camera Module
1x 16-pin Camera Module for up to 4x 16-pin cameras (w/o LEDs). Requires High G Rack Hub (1140-0100).
Part Number: 1147-0110
LED Module
1x LED Module for up to 4x CrashLED 160, LED 12, LED 8, or FlexLED. Requires High G Rack Hub (1140-0100).
Part Number: 1148-0100
Ethernet Cable
1x RJ45 Ethernet connector to 19-pin LEMO connector for High G Rack Hub (1140-0100).
Part Number: 1140-0400
Power Cable
1x Power cable for High G Rack Hub. 4-pin Amphenol Bayonet locking connector. For use with High G Rack Hub (1140-0100) only.
Part Number: 1140-0401
IEEE1588 PTP HUB
1x IEEE1588 PTP HUB provides precision timing over Giga Ethernet and synchronizes any IEEE1588 supported device that shares the same network. Controls up to two cameras and includes IEEE1588 PTP Hub Power Supply 1425-0150. Compatible with 19-pin cameras (NX-Air with exception to the IEEE1588 protocol). The IEEE1588 PTP HUB also compatible with V-Lock Batteries.
Part Number: 1425-0100
F-Mount
Provides F-Mount Lens Compatibility. Can replace with C-mount.
Part Number: 1400-3000
3-Port miniHUB
1x miniHUB wired and ac WiFi wireless control. Provides power, communication, synchronization and control for up to three 19-pin cameras. Power supply 1424-0100 and trigger cable 1116-0400 included.
Part Number: 1135-0100
24V Power Supply
24V Power Supply for OS Breakout Cable 1100-0009
Part Number: 1100-0103
19-pin 6-Port Hub
1x 6 Port Hub, provides power, communication, synchronization and control for up to six 19-pin cameras (without LEDs). Integrated battery backup, wired and wireless control.
Part Number: 1091-1100
6-Port Hub Power Supply
1x 24V Power Supply for NX-HUB 1091-0900 and NXA-HUB 1091-1100 includes 1091-0901 cable.
Part Number: 1089-0900
Power Supply Accessory Cable
1x 8 pin to 8 pin LEMO cable for connection from 6 Port Hub 1091-1100 to 24V Power Supply 1089-0900.
Part Number: 1091-0901
19-pin 5 Meter Camera Cable
1x 19-pin to 19-pin LEMO straight cable, 5m. Compatible with 19-pin cameras and hubs.
Part Number: 1084-0200-1
19-pin 10 Meter Camera Cable
1x 19-pin to 19-pin LEMO straight cable, 10m. Compatible with 19-pin cameras and hubs.
Part Number: 1084-0200-3
19-pin 20 Meter Camera Cable
1x 19-pin to 19-pin LEMO straight cable, 20m. Compatible with 19-pin cameras and hubs.
Part Number: 1084-0200-5
PL-Mount
Provides PL-Mount Lens Compatability. Can replace with C-mount. Note: PL-mount not for High G applications.
Part Number: 1302-0100
19-pin 90° 5 Meter Cable
1x 19-pin to 19-pin LEMO cable, attaches to camera at a downward 90° angle, 5m. Compatible with 19-pin cameras and hubs.
Part Number: 1123-0400-1
19-pin 90° 10 Meter Cable
1x 19-pin to 19-pin LEMO cable, attaches to camera at a downward 90° angle, 10m. Compatible with 19-pin cameras and hubs.
Part Number: 1123-0400-3
19-pin 90° 20 Meter Cable
1x 19-pin to 19-pin LEMO cable, attaches to camera at a downward 90° angle, 20m. Compatible with 19-pin cameras and hubs.
Part Number: 1123-0400-5
24V Power Supply
1x 24V Power Supply with 8-pin LEMO connector for miniHUB 1135-0100, TC19 HUB 1447-0100 and TC30 HUB 1447-0110.
Part Number: 1424-0100
Micro Four Thirds Mount
Manual Micro Four Thirds Mount for O, OS, OSA, and CC model cameras. Can be replaced at manufacturer facility.
Part Number: 1501-0100
IEEE1588 PTP Hub Battery & Battery Plate
Package includes IEEE 1588 PTP Hub Battery 1425-0151 and IEEE 1588 PTP Hub Battery Plate 1425-0152. Add on at manufacturing facility.
Part Number: 1425-7001
IEEE1588 PTP Hub Power Supply
1x 24V Power Supply with 4-Pin LEMO connector for IEEE1588 PTP HUB 1425-0100.
Part Number: 1425-0150
IEEE 1588 PTP Hub Battery
IEEE 1588 PTP Hub Battery
Part Number: 1425-0151
IEEE 1588 PTP Hub Battery Plate
IEEE 1588 PTP Hub Battery Plate
Part Number: 1425-0152
Break-out Cable
1x 19-pin LEMO to 4x BNC, 1x DIN power and 1x RJ45 break-out cable, 5ft. Compatible with 19-pin cameras and 19-pin adapters.
Part Number: 1100-0009
Short Integration
Add Short Integration to cameras configuration. Short Integration option: 600 nsec exposure. (This option is subject to U.S. export regulations.)
Part Number: -SI
PIV
Add PIV to cameras configuration. Includes a timing interface to synchronize and trigger any laser. Supports double exposure with 600 nanosecond interframe time. Includes dongle with proVISION software.
Part Number: -PIV
TC19
TC19 HUB - 4 Port 19-pin Timing Control Hub. Provides power, communication, synchronization and control for up to four 19-pin cameras (without LEDs) or CrashCam mini with USB-C connector (Requires USB-C to 19-pin Adapter 1421-0131). Dual battery connector ports allow for untethered operation.
Part Number: 1447-0100
TC19 and TC30 Battery Module
45 Watt Hour Battery Module for Timing Control Hubs
Part Number: 1447-0130
TC HUB Ethernet Cable
1x Mini I/O connector to RJ45 connector, 1m Ethernet cable for TC19 HUB 1447-0100, TC30 HUB 1447-0110, or Single Port HUB 1450-0100.
Part Number: 1447-0400
SMA to BNC Cable
1x SMA Male to 1x BNC Male, 5.0 ft. Can be used with trigger pickle switch or between SMA connectors on hubs and devices with BNC connectors. Compatible with all camera series and hubs.
Part Number: 1116-0400
o-series-break-out-cable-configuration
MORE IDT CAMERAS

XS SERIES

Record to Disk with PCIE

O SERIES

Integrated Lens Control

CCM SERIES

Ultra-compact

OS SERIES

Operate in Demanding Environments

NX SERIES

Compact Camera Design

Y SERIES

Supports Long Record Times

NX-Air SERIES

Untethered Operation
Previous Next