Option 1
DT offers three breakout box options for operating NR cameras. Option 1 is the lightest, most basic scheme. From a single 16 pin LEMO connector jack two distinct 5 meter cables emerge: the first, a Gigabit ethernet cable, enables computer connection and control, while the second, an 8-pin LEMO cable, communicates with the option 1 box. The box enable external triggering , camera syncing and an input for power. Also included is the NR power supply.
Part-number:
-->
Option 2
IDT offers three breakout box options for operating NR cameras. Option 2 combines the separate components of option 1 into a single unit for greater simplicity of setup and control. One 5 meter, 16-pin LEMO cable connects the camera to the option 2 box, consisting of the triggering and syncing jacks, the Gigabit ethernet jack (requiring an additional ethernet cable), power jack and an on/off switch.
Option 3
IDT offers three breakout box options for operating NR cameras. Option 3 takes option 2 and adds battery backup. In addition to the triggering and syncing jacks, the Gigabit ethernet jack (requiring an additional ethernet cable), power jack and on/off switch, the option 3 box contains a 3200 Amp-hour battery which activates automatically in case of power outage, protecting the camera from unexpected data loss. The battery can also be used to operate the camera for hours without an external power supply.
7-Port HUB
The NR hub is designed to supply a common power and ethernet connectivity to up to 7 cameras. The cameras are connected to the hub via the 16-pin LEMO cable and are automatically configured for Master/Slave operation
Part-number: N-HUB07
Battery
UPS
The uninterruptible power supply provides regulated 12 volt for Y- and N-series cameras. This quality power supply can run one Y camera or four NR cameras up to 3 hours. To recharge the UPS from a fully discharged state it will take about 2,5 hours.
Part-number: N-UPS
16 Pin LEMO Connector Cable
Provides the single link for connecting NR cameras to control options 2 and 3. All cables are 5 meters with authentic locking LEMO connectors. Cable jackets are braided for additional wire protection.
